Home > Publications

Hub Outputs

2024

Nguyen, S., Anthony, D.B., Katafiasz, T., Qi, G., Razavi, S., Senokos, E., Greenhalgh, E.S., Shaffer, M.S.P., Kucernak, A. R.J., Linde, P., Manufacture and characterisation of a structural supercapacitor demonstrator

Composites Science and Technology, 2024; 245 (5): 110339

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compscitech.2023.110339

Mussatayev, M., Yi, Q., Fitzgerald, M., Maes, V.K., Wilcox, P., Hughes, R., Directional Eddy Current Probe Configuration for In-Line Detection of Out of Plane Wrinkles

Composites Part B, 2024; Volume 268 (111048):

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesb.2023.111048

O'Rourke, K., Millar, B., Doyle, A., Doyle, K., Griffin, C., Hartmann M., Christensen, B., Ó Brádaigh, C.M., Roy, D. , Diverted from Landfill: Manufacture and Characterisation of Composites from Waste Plastic Packaging and Waste Glass Fibres

Sustainable Materials and Technologies, 2024; Volume 39 ():

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.susmat.2024.e00851

Tso, M., Iglesias, M., & Binley, A., Ensemble Kalman Inversion for Induced Polarization Data

Geophysical Journal International, 2024; 236(3) (): 1877–1900

Grant Number: EP/P006701/1

http://dx.doi.org/10.1093/gji/ggae012

Kratz J., Paris C., Gaska K., Maes V., Partridge I., Olivier P, Effects of Accelerated Curing in Thermoplastic Particle Interleaf Epoxy Laminates

Composites Part A: Applied Science and Manufacturing, 2024; 177 (107922):

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesa.2023.107922

Codolini, A., Chen, S., Lawrence, G.D., Harper, L.T., Sutcliffe, M.P.F., Characterisation of Process-Induced Variability in Wrinkle Defects during Double Diaphragm Forming of Non-Crimp Fabric

Composites Part B, 2024; 281 (111549):

Grant Number: Grant Number: EP/P006701/1

Hartley, R., Kratz, J., CFRP Layer-by-Layer Curing using Research-Based Automated Deposition System

Manufacturing Letters, 2024; 40 (): 85-88

Grant Number: EP/P006701/1

2023

Struzziero, G., Barbezat, M., Skordos, A.A., Assessment of the benefits of 3D printing of advanced thermosetting composites using process simulation and numerical optimisation

Additive Manufacturing, 2023; 63 (): 103417

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.addma.2022.102719

Jimenez-Fortunato, I., Bull D.J., Thomsen O.T., Dulieu-Barton J.M., Quantitative Microbolometer-based Thermoplastic Stress Analysis

Optics and Lasers in Engineering, 2023; 160 (): 107276

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.optlaseng.2022.107276

Li, S., Johnson, M.S., Sitnikova, E., Evans, R., Mistry, P.J., Laminated beams/shafts of annular cross-section subject to combined loading

Thin-Walled Structures , 2023; 183 (Part A): 110153

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.tws.2022.110153

Yi, Qi., Wilcox, P., Hughes, R., Modelling and evaluation of carbon fibre composite structures using high-frequency eddy current imaging

Composites Part B: Engineering, 2023; (): 110343

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesb.2022.110343

Campbell, I., Mulvihill, D.M., Harrison, P., The influence of residual tin following induction melt thermoforming of composite parts

Composites Part A: Applied Science and Manufacturing, 2023; 164 (): 107286

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesa.2022.107286

Syerko, E., Schmidt, T., May, D., Binetruy, C., Advani, S.G., Lomov, S., Silva, L., Abaimov, S., Aissa, N., Akhatov, I., Ali, M., Asiaban, N., Broggi, G., Bruchon, J., Caglar, B., Digonnet, H., Dittmann, J., Drapier, S., Du Roscoat, S.R., Endruweit, A., Guilloux, A., Kandinskii, R., Leygue, A., Mahato, B., Martinez, P., Matveev, M., Michaud, V., Middendorf, P., Moulin, N., Orgéas, L., Park, C.H., Rief, S., Rouhi, M., Schladitz, K., Sergeichev, I., Shakoor, M., Shishkina, O., Swolfs, Y., Tahani, M., Umer, R., Vanclooster, K., Vorobyev, R., Benchmark exercise on image-based permeability determination of engineering textiles: Microscale predictions

Composites Part A: Applied Science and Manufacturing, 2023; 167 ():

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesa.2022.107397

Yu, F., Chen, S., Lawrence, G.D., Warrior, N.A., Harper, L.T, A global-to-local sub modelling approach to investigate the effect of lubrication during double diaphragm forming of multi-ply biaxial non-crimp fabric

Composites Part B: Engineering, 2023; Volume 254 (): 110590

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesb.2023.110590

Greenhalgh, E.S., Nguyen, S., Valkova, M., Shirshova, N., Shaffer, M.S.P., Kucernak, Ar.R.J., A critical review of structural supercapacitors and outlook on future research challenges

Composites Science and Technology, 2023; 235 (): 109968

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compscitech.2023.109968

Danezis A., Williams D., Skordos A.A, One-dimensional approximation of heat transfer in flashlamp-assisted automated tape placement

Journal of Thermoplastic Composite Materials , 2023; ():

Grant Number: EP/P006701/1

https://doi.org/10.1177/08927057231158537

Maes, V.K., Radhakrishnan, A., Lombetti, D., Kratz, J, Zonally Heated Tooling for Moulding Complex and Highly tapered Composite Parts

Frontiers in Materials, 2023; 10 ():

Grant Number: EP/P006701/1

https://doi.org/10.3389/fmats.2023.1126932

Viisainen, J.V., Yu, F., Codolini, A., Chen, S., Harper, L.T., Sutcliffe, M.P.F, Rapidly predicting the effect of tool geometry on the wrinkling of biaxial NCFs during composites manufacturing using a deep learning surrogate model

Composites Part B: Engineering, 2023; 253 (): 110536

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesb.2023.110536

Valentine, M.D.A., Radhakrishnan, A., Maes, V.K., Pegg, E.C., Valero, D.R., Kratz, J., Dhokia, V, Additively manufactured cure tools for composites manufacture

The International Journal of Advanced Manufacturing Technology, 2023; ():

Grant Number: EP/P006701/1

https://link.springer.com/article/10.1007/s00170-023-11254-y

Chen, Y., Dodwell, T., Chuaqui, T.R.C., Butler, R., Full-Field Prediction of Stress and Fracture Patterns in Composites using Deep Learning and Self-Attention

Engineering Fracture Mechanics , 2023; 286 (): 109314

Grant Number: EP/P006701/1

http://dx.doi.org/10.13140/RG.2.2.17744.17924

Chen, Y, High-Performance Computational Homogenization of Stokes-Brinkman flow with Anderson-accelerated FFT Method

International Journal for Numerical Methods in Fluids, 2023; 95 (9): 1441-1467

Grant Number: EP/P006701/1

https://doi.org/10.1002/fld.5199

Fisher, A., Radhakrishnan, A., Kratz, J, The Influence of key processing parameters on thermoset laminate curing

Composite Communications, 2023; 42 (): 101686

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.coco.2023.101686

Street, G.E., Johnson, M.S., The Intra-Ply Shear Behaviour of Non-Isothermal Thermoplastic Composite Laminates

Journal of Composites Science, 2023; 7 (10):

Grant Number: EP/P006701/1

https://doi.org/10.3390/jcs7100432

Palubiski, D.,R., Longana, M.L., Dulieu-Barton, J.M., Hamerton, I. and Ivanov, D.S, Multi-matrix continuously-reinforced composites: a novel route to sustainable repair of composite structures

Materials and Design, 2023; 235 (): 112446

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.matdes.2023.112446

Scarth C., Chen Y., Aza C., Rhead A.T., Butler R. , Manufacture of Long Spars: Laminate Design, Experimental Trials and Non-destructive Evaluation

Composites Part B: Engineering, 2023; 255 (110646):

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesb.2023.110646

Lawrence G.D., Chen S., Warrior N.A., Harper L.T. , The Influence of Inter-Ply Friction during Double-Diaphragm Forming of Biaxial NCFs

Composites Part A: Applied Science and Manufacturing, 2023; 255 (110646):

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesa.2023.107426

2022

Parsons, A.J.,Gonciaruk, A., Zeng, X., Thomann, F.S., Schubel, P.J., Lorrillard, J., Johnson,M.S., Controlling mass loss from RTM6 epoxy resin under simulated vacuum infusion conditions

Polymer Testing, 2022; 107 (): 107473

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.polymertesting.2022.107473

Zhang, H., Li, A., Wu, J., Sun, B., Wang, C., Yang, D, Effectiveness of fibre placement in 3D printed open-hole composites under uniaxial tension

Composites Science and Technology, 2022; 220 (): 109269

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compscitech.2022.109269

Valkova, M., Anthony, D.D., Kucernak, A.R.J., Shaffer, M.S.P., Greenhalgh, E.S., Predicting the mechanical behaviour of structural supercapacitor composites

Composites Part A: Applied Science and Manufacturing, 2022; 156 (): 106860

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesa.2022.106860

Johnson, M.S., Evans, R., Mistry, P.J., Li, S., Bruni, S., Bernasconi, A., Cervello, S., Structural analysis for the design of a lightweight composite railway axle

Composite Structures, 2022; 290 (): 115544

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compstruct.2022.115544

Nachtane, M., Meraghni, F., Chatzigeorgiou, G., Harper, L.T., Pelascini, F., Multiscale viscoplastic modeling of recycled glass fiber-reinforced thermoplastic composite: Experimental and numerical investigations  

Composites Part B: Engineering, 2022; 242 (): 110087

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesb.2022.110087

Ishfaq A., Nguyen S.N., Greenhalgh E.S., Shaffer, M.S.P., Kucernak, A.R.J., Leif, E Asp.., Zenkert, D., Linde, P., Multifunctional Design, Feasibility and Requirements for Structural Power Composites in Future Electric Air Taxis

Journal of Composite Materials, 2022; ():

Grant Number: EP/P006701/1

https://doi.org/10.1177/00219983221132621

Endruweit, A., Matveev, M., Tretaykov, M.V., Controlling resin flow in Liquid Composite Moulding processes through localized irradiation with ultra violet light

Polymer Composites, 2022; 43 (11): 8308-8321

Grant Number: EP/P006701/1

https://onlinelibrary.wiley.com/doi/epdf/10.1002/pc.27001

Gandhi, N., Rose, R., Croxford, A.J., Ward, C., Understanding System Complexity in the Non-Destructive Testing of Advanced Composite Products

Journal of Manufacturing and Materials Processing, 2022; (MDPI):

Grant Number: EP/P006701/1

https://www.mdpi.com/2504-4494/6/4/71

Budwal, N., Kasper, K., Goering, J., Ward, C., Tooling and Infusion Design Strategies to Reduce Trade-Offs in Forming and Infusion Quality of Multi-Textile CFRPs

Journal of Manufacturing and Materials Processing, 2022; (MDPI):

Grant Number: EP/P006701/1

https://www.mdpi.com/2504-4494/6/3/62

Elkington, M.P., Mistry, P.J., Johnson, M.S., Ou, H, Hybrid vacuum-robotic forming of reinforced composite laminates

Journal of Reinforced Plastics & Composites, 2022; (SAGE): 1-12

Grant Number: EP/P006701/1

https://journals.sagepub.com/doi/10.1177/07316844221135211

Evans, A.D., Turner, T., Harper, L.T., Warrior, N.A, Design guidelines for hybrid continuous/discontinuous carbon fibre laminates

Journal of Composite Materials, 2022; 56 (6): 1513-1527

Grant Number: EP/P006701/1

https://doi.org/10.1177/0021998322107878

Fisher, A., Levy, A., Kratz, J., Effects of heat transfer coefficient variations on composite curing

Journal of Composite Materials, 2022; ():

Grant Number: EP/P006701/1

https://doi.org/10.1177/00219983221145506

Turk, M.A., Cao, H., Thompson, A..J., Belnoue J.P-H., Hallett, S.R, Ivanov, D.S., A New Approach to Measuring Local Properties of Preforms Enhanced for Formability

Frontiers in Materials, 2022; 9 ():

Grant Number: EP/P006701/1

https://doi.org/10.3389/fmats.2022.867591

Pernice, M.F., Qi, G., Senokos, E., Anthony, D.B., Nguyen, S., Valkova, M., Greenhalgh, E.S., Shaffer, M.S.P., Kucernak, A.R.J., Mechanical, electrochemical and multifunctional performance of a CFRP/carbon aerogel structural supercapacitor and its corresponding monofunctional equivalents

Multifunctional Materials, 2022; ():

Grant Number: EP/P006701/1

https://doi.org/10.1088/2399-7532/ac65c8

Chada, N.K., Iglesias, M.A., Lu, S., Werner, F., On a Dynamic Variant of the Iteratively Regularized Gauss-Newton Method with Sequential Data

CoRR abs/2207.13499 (2022), 2022; ():

Grant Number: EP/P006701/1

https://doi.org/10.48550/arXiv.2207.13499

Holmes, C., Godfrey, M., Mennea, P.L., Zahertar, S., Dulieu-Barton, J.M., Flexible Photonics in low Stiffness doped Silica for use in Fibre Reinforced Polymer Composite Materials

Optical Materials, 2022; 134, Part A (Science Direct): 113133

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.optmat.2022.113133

Holmes, C., Godfrey, M., Mennea, P.L., Zahertar, S., Dulieu-Barton, J.M., Flexible photonics in low stiffness doped silica for use in fibre reinforced polymer composite materials

Optical Materials, Part A , 2022; 134 (): 113133

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.optmat.2022.113133

Bruni, S., Mistry, P.J., Johnson, M.S., Bernasconi, A., Carboni, M., Formaggioni, D., Carra, G., Macchiavello, S., Ferrante, E., Kaiser, I., Viñolas, J., Marazzi, I, A vision for a lightweight railway wheelset of the future, Proceedings of the Institution of Mechanical Engineers

Part F: Journal of Rail and Rapid Transit, 2022; (): 1-19

Grant Number: EP/P006701/1

https://doi.org/10.1177/09544097221080619

2021

Xiao, Z., Harrison, P., Design of buckling and damage resistant steered fibre composite laminates using trellis shear kinematics

Composite Structures, 2021; Volume 260, 2021, 113526. ():

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compstruct.2020.113526

Viisainen, J.V., Hosseini, A., Sutcliffe, M.P.F., Experimental investigation, using 3D digital image correlation, into the effect of component geometry on the wrinkling behaviour and the wrinkling mechanisms of a biaxial NCF during preforming

Composites Part A: Applied Science and Manufacturing, 2021; Volume 142, 2021, 106248 ():

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesa.2020.106248

Harrison, P., Gonzalez Camacho, L.P., Deep draw induced wrinkling of engineering fabrics

International Journal of Solids and Structures, 2021; Volume 212, 2021 (): Pages 220-236

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.ijsolstr.2020.12.003

Yousefi, N., Evans, A., Harper, L.T., Maples, H.M., James,T., Bismarck, A., Solid epoxy resin systems for automated composite manufacturing

Composites Part A: Applied Science and Manufacturing, 2021; Volume 142, 2021, 106205 ():

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesa.2020.106205

Elkington, M., Almas, E., Ward- Cherrier, B., Pestell, N., Lloyd, J., Ward, C., Lepora, N., Real time defect detection during composite layup via Tactile Shape Sensing

Journal of Science and Engineering of Composite Materials, 2021; 28 (1): 1-10

Grant Number: EP/P006701/1

https://www.degruyter.com/document/doi/10.1515/secm-2021-0001/html

Yu, F. Chen S, Harper L, Warrior N, Simulating the effect of fabric bending stiffness on the wrinkling behaviour of biaxial fabrics during preforming

Composites Part A: Applied Science and Manufacturing, 2021; 143 (106308):

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesa.2021.106308

Matveev, M,. J., Endruweit, A., Long, A.C., Iglesias, M.A., Tretyakov, M.V., Bayesian inversion algorithm for estimating local variations in permeability and porosity of reinforcements using experimental data

Composites Part A: Applied Science and Manufacturing, 2021; 143 (106323):

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesa.2021.106323

Gautam, M., Sivakumar, S., Barnett, A., Barbour, S., Ogin, S.L., Potluri, P., On the behaviour of flattened tubular Bi-axial and Tri-axial braided composites in tension

Composite Structures, 2021; 261 (113325):

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compstruct.2020.113325

Karim, N., Sarker, F., Afroj, S., Zhang, M., Potluri, P., Novoselov, K.S., Sustainable and Multifunctional Composites of Graphene-Based Natural Jute Fibers

Advanced Sustainable Systems, 2021; ():

Grant Number: EP/P006701/1

https://doi.org/10.1002/adsu.202000228

Iglesias, M., Yang.Y., Adaptive regularisation for ensemble Kalman inversion

Inverse Problems, 2021; 37 (2): 025008

Grant Number: EP/P006701/1

O'Keeffe C., Pickard L.R., Cao J., Allegri J., Partridge I.K., Ivanov D.S. , Multi-material braids for multifunctional laminates: conductive through-thickness reinforcement

Functional Composite Materials,, 2021; ():

Grant Number: EP/P006701/1

https://doi.org/10.1186/s42252-021-00018-0

Mistry, P.J., Johnson, M.S., McRobie, C.A., Jones, I.A., Design of A Lightweight Multifunctional Composite Railway Axle Utilising Coaxial Skins

Journal of Composites Science (Special Issue), 2021; 5 (3):

Grant Number: EP/P006701/1

https://doi.org/10.3390/jcs5030077

Mistry, P.J., Johnson, M.S., Li, S., Bruni, S., Bernasconi, A., Parametric sizing study for the design of a lightweight composite railway axle

Composite Structures, 2021; (): 113851

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compstruct.2021.113851

Yousaf, Z., Withers, P. J. & Potluri, P, Compaction, nesting and image based permeability analysis of multi-layer dry preforms by computed tomography (CT)

Composite Structures, 2021; 263 (): 113676

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compstruct.2021.113676

Nguyen, S., Millereux, A., Pouyat, A., Greenhalgh, E.S., Shaffer, M.S.P., Kucernak, A.R.J., Linde, P, Conceptual Multifunctional Design, Feasibility and Requirements for Structural Power in Aircraft Cabins

Aerospace Research Central, 2021; ():

Grant Number: EP/P006701/1

https://doi.org/10.2514/1.C036205

Yu, F., Chen, S., Harper, L.T., Warrior, N.A., Double diaphragm forming simulation using a global-to-local modelling strategy for detailed defect detection in large structures

Composites Part A: Applied Science and Manufacturing, 2021; 147 (): 106457

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesa.2021.106457

Street, G.E., Mistry, P.J., Johnson, M.S., Impact Resistance of Fibre Reinforced Composite Railway Freight Tank Wagons

Journal of Composites Science (Special Issue), 2021; 5(6) (152):

Grant Number: EP/P006701/1

https://doi.org/10.3390/jcs5060152

Yu, F. Chen S, Harper L, Warrior N, Investigation into the effects of inter-ply sliding during double diaphragm forming for multi-layered biaxial non-crimp fabrics

Composites Part A: Applied Science and Manufacturing, 2021; (): 1-44

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesa.2021.106611

Hubert, P., Kratz, J., Tool interface pressure during the forming of model composite corners

Composites Part A: Applied Science and Manufacturing, 2021; ():

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesa.2021.106639

Sun, X., Belnoue, J.P.H., Wang, W., Kim, B.C., Hallett, S.R., Un-forming” fibre-steered preforms: Towards fast and reliable production of complex composites parts

Composites Science and Technology, 2021; 216 (): 109060

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compscitech.2021.109060

Jiménez-Fortunato, I., Bull, D.J., Thomsen, O.T., Dulieu-Barton, J.M, On the source of the thermoelastic response from orthotropic fibre reinforced composite laminates

Composites Part A: Applied Science and Manufacturing, 2021; 149 (): 106515

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesa.2021.106515

Noble, T., Davidson, J.R., Floreani, C., Bajpai, A., Moses, W., Dooher, T., McIlhagger, A., Archer, E., Ó Brádaigh, C.M., Robert, C, Powder Epoxy for One-Shot Cure, Out-of-Autoclave Applications: Lap Shear Strength and Z-Pinning Study

Journal of Composites Science , 2021; 5 (225): 1-19

Grant Number: EP/P006701/1

https://doi.org/10.3390/jcs5090225

Viisainen, J. V., Sutcliffe, M.P.F, Characterising the variability in wrinkling during the preforming of non-crimp fabrics

Composites Part A: Applied Science and Manufacturing 149 (2021), 106536., 2021; 149 (): 106536

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesa.2021.106536

Chen, S., Joesbury, A., Yu, F., Harper, L.T., Warrior, N.A., Optimisation of intra-ply stitch removal for improved formability of biaxial non-crimp fabrics

Composites Part B: Engineering, 2021; 229 (): 109464

Grant Number: EP/P006701/1

doi.org/10.1016/j.compositesb.2021.109464

Struzzieroa, G., Barbezata, M., Skordos, A., Consolidation of continuous fibre reinforced composites in additive processes: A review

Additive Manufacturing, 2021; 48 (Part B): 102458

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.addma.2021.102458

Robert, C., Mamalis, D., Obande,W., Koutsos, V., Ó Brádaigh, C.M., Ray, D., Interlayer bonding between thermoplastic composites and metals by in-situ polymerization technique

Journal of Applied Polymer Science, 2021; 138 (40): 51188

Grant Number: EP/P006701/1

https://doi.org/10.1002/app.51188

Karadotcheva, E., Nguyen, S., Greenhalgh, E., Shaffer, M., Kucernak, A., Linde, P., Structural power performance targets for future electric aircraft

Energies, 2021; 14 (19): 6006

Grant Number: EP/P006701/1

https://doi.org/10.3390/en14196006

Selver, E., Potluri, P., Intra-tow micro-wrapping for damage tolerance

Composites Science and Technology, 2021; 213 (): 108935

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compscitech.2021.108935

Qi, G., Nguyen, S., Anthony, D. B., Kucernak, A. R. J., Shaffer, M. S. P., Greenhalgh, E. S., The influence of fabrication parameters on the electrochemical performance of multifunctional structural supercapacitors

Multifunctional Materials, 2021; 4 (3): 034001

Grant Number: EP/P006701/1

https://doi.org/10.1088/2399-7532/ac1ea6

Belnoue, J.P.H., Valverde, M.A., Onoufriou, M., Sun (Ric), X., Ivanov, D.S., Hallett, S.R., On the physical relevance of power law-based equations to describe the compaction behaviour of resin infused fibrous materials

International Journal of Mechanical Sciences, 2021; 199 (): 106425

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.ijmecsci.2021.106425

2020

F. Yu, S. Chen, J.V. Viisainen, M.P.F. Sutcliffe, L.T. Harper, N.A. Warrior, A macroscale finite element approach for simulating the bending behaviour of biaxial fabrics

Composites Science and Technology, 2020; 191 ():

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compscitech.2020.108078

Valkova, M., Anthony, D.B., Kucernak, A., Shaffer, M.S.P., Greenhalgh, E.S., Predicting the compaction of hybrid multilayer woven composite reinforcement stacks

Composites Part A: Applied Science and Manufacturing, 2020; 133 ():

Grant Number:

https://doi.org/10.1016/j.compositesa.2020.105851

Elkington, M., Almas, E., Ward-Cherrier, B., Pestell, N., Lloyd, J., Ward, C., Lepora, N.,, Real time defect detection during composite layup via Tactile Shape Sensing

Journal of Science and Engineering of Composite Materials, 2020; ():

Grant Number: EP/P006701/1

PJ Mistry P.J., Johnson M.S., Galappaththi, U.I.K., Selection and ranking of rail vehicle components for optimal lightweighting using composite materials

Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2020; 133, 2020; ():

Grant Number: EP/P006701/1

https://journals.sagepub.com/doi/full/10.1177/0954409720925685

Johannisson, W., Nguyen, S., Lindbergh, G., Zenkert, D., Greenhalgh, E., Shaffer, M.S.P., and Kucernak A., A residual performance methodology to evaluate multifunctional systems

Multifunctional Materials, 2020, 2020; ():

Grant Number: EP/P006701/1

https://doi.org/10.1088/2399-7532/ab8e95

Harrison, P., Campbell, I., Guliyev, E., McLelland, B., Gomes, R., Curado-Correia, R., McGookin, E., Mulvihill, D.M., Induction melt thermoforming of advanced multi-axial thermoplastic composite laminates

Journal of Manufacturing Processes, 2020; Volume 60 (): Pages 673-683

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.jmapro.2020.10.026

Willicombe, K., Elkington, M., Hamerton, I., Ward, C., Development of Novel Transportation Shells for the Rapid, Automated Manufacture of Automotive Composite Parts

Procedia Manufacturing, 2020; Volume 51 (): Pages 818-825

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.promfg.2020.10.115

Budwal, N., Kasper, K., Goering, J., Ward. C., Flexible low-cost tooling solutions for a one-shot resin infusion of a 3D woven and multi-textile preform

Procedia Manufacturing, 2020; Volume 51 (): Pages 856-863

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.promfg.2020.10.120

Gandhi, N., Rose, R., Croxford, A., Ward,C., Developing a high-fidelity knowledge base for improvements in the non-destructive testing of advanced composite material products

Procedia Manufacturing, 2020; Volume 51 (): Pages 345-352

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.promfg.2020.10.049

Matveev, M.Y., Brown, L.P., Long, A.C., Efficient meshing technique for textile composites unit cells of arbitrary complexity

Composite Structures, 2020; Volume 254 (112757):

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compstruct.2020.112757

Chai, Y., Wang, Y., Yousaf, Z., Storm, M., Vo, N.T., Wanelik, K., Burnett, T.L., Potluri, P., Withers, P.J., Following the effect of braid architecture on performance and damage of carbon fibre/epoxy composite tubes during torsional straining

Composites and Science Technology, 2020; 200 (108451):

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compscitech.2020.108451

Turk M.A., Vermes B., Thompson A.J., Belnoue J.P.-H., Hallett S.R., Ivanov D.S. , Mitigating forming defects by local modification of dry preforms

Composites A: Applied Science and Manufacturing, 2020; 128 (): 105643

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesa.2019.105643

Sun, X., Belnoue, J.P.H., Wang, W., Kim, B.C., Hallett, S.R., Virtual Un-manufacturing of Fibre-steered Preforms for Complex Geometry Composites

Procedia Manufacturing, 2020; 47 (): 197-201

Grant Number: EP/P006701/1

doi.org/10.1016/j.promfg.2020.04.175

2019

Veldenz, L., Di Francesco, M., Giddings, P., Kim, B.C., Potter, K., Material selection for automated dry fiber placement using the analytical hierarchy process

Advanced Manufacturing: Polymer and Composites Science, 2019; Online: 24th January 2019 (): 83 -96

Grant Number: EP/P006701/1

https://doi.org/10.1080/20550340.2018.1545377

May, D., Aktas, A., Advani, S.G., Endruweit, A., Fauster, E., Lomov, S.V., Long, A., Mitschang, P., Abaimov, S., Abliz, D., Akhatov, I., Allen, T.D., Berg, D.C., Bickerton, S., Bodaghi, M., Caglar, B., Caglar, H., Correia, N., Danzi, M., Dittmann, J., Ermanni, P., George, A., Grishaev, V., Kabachi, M.A., Kind, K., Lagardère, M.D., Laspalas, M., Liotier, P.J., Park, C.H., Pipes, R.B., Pucci, M., Raynal, J., Rodriguez, E.S., Schledjewski, R., Schubnel, R., Sharp, N., Sims, G., Sozer, E.M., Umer, R., Willenbacher, B., Yong, A., Zaremba, S., Ziegmann, G., In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise

Composites Part A: Applied Science and Manufacturing, 2019; 121 (): 110 -114

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesa.2019.03.006

Turk, M, Vermes, B, Thompson, A, Belnoue, J. P.H, Hallett, S. R, Ivanov, D. S, Mitigation against forming defects by local modification of dry preforms

Composites Part A, Special Issue of Euromech 602 congress :Composite manufacturing processes. Analyses, modelling and simulations, 2019; ():

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesa.2019.105643

Matveev, M, Endruweit, E, De Focatiis D. S. A., Long A.C, Warrior, N.A, A novel criterion for the prediction of meso-scale defects in textile preforming

Composite Structures, 226, 2019, 2019; (): pp.111263

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compstruct.2019.111263

Mistry, P, J., Johnson, M. S., Lightweighting of railway axles for the reduction of unsprung mass and track access charges

Part F: Journal of Rail and Rapid Transit, 2019; ():

Grant Number: EP/P006701/1

https://journals.sagepub.com/doi/pdf/10.1177/0954409719877774

Herring, R, Dyer, K, Macleod, A, Ward, C, Computational fluid dynamics methodology for characterisation of leading edge erosion in whirling arm test rigs

Journal of Physics: Conference Series, 2019; ():

Grant Number: EP/P006701/1

https://doi.org/10.1088/1742-6596/1222/1/012011

Herring, R, Dyer, K, Macleod, A, Martin, F, Ward, C, The increasing importance of leading edge erosion and a review of existing protection solutions

Renewable and Sustainable Energy Reviews, 2019; ():

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.rser.2019.109382

S. Chen, O. P. L. McGregor, A. Endruweit, L. T. Harper, N. A. Warrior, Simulation of the forming process for curved composite sandwich panel

International Journal of Material Forming, 2019; ():

Grant Number: EP/P006701/1

https://doi.org/10.1007/s12289-019-01520-4

Yan, S., Zeng, X., Long, A.C., Meso-scale Modelling of 3D Woven Composite T-joints with Weave Variations

Composites Science and Technology, 2019; 171 (): 171-179

Grant Number: EP/IO33513/1

https://doi.org/10.1016/j.compscitech.2018.12.024

Matveev, M.Y., Belnoue, J.P-H., Nixon-Pearson, O.J., Ivanov, D.S., Long, A.C., Hallett, S.R., Jones, I.A, A Numerical Study of Variability in the Manufacturing Process of Thick Composite Parts

Composite Structures, 208, 2019; 208 (): 23-32

Grant Number: EP/IO33513/1

https://doi.org/10.1016/j.compstruct.2018.09.092

Russell, B.K., Takeda, S., Ward. C., Hamerton, I., Examining the influence of carboxylic anhydride structures on the reaction kinetics and processing characteristics of an epoxy resin for wind turbine applications

Reactive and Functional Polyners, 2019; 144 (Reactive and Functional Polymers): 104353

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.reactfunctpolym.2019.104353

2018

Endruweit, A., Zeng, X., Matveev, M., Long. A.C., Effect of yarn cross-sectional shape on resin flow through inter-yarn gaps in textile reinforcements

Composites Part A: Applied Science and Manufacturing, 2018; 104 (1): 139-150

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2017.10.020

Mamalis, D., Obande, W., Koutsos, V., Blackford, J., Ó Brádaigh, C.M., Ray, D., Novel thermoplastic fibre-metal laminates manufactured by vacuum resin infusion: The effect of surface treatments on interfacial bonding

Materials & Design , 2018; 162 (): 331 -344

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.matdes.2018.11.048

Yan, S., Zeng, X., Long, A.C., Experimental Assessment of the Mechanical Behaviour of 3D woven Composite T-joints

Composites Part B, 2018; 154 (): 108-113

Grant Number: EP/IO33513/1

https://doi.org/10.1016/j.compositesb.2018.08.007

2017

Belnoue, J.P-H., Tassos, M., Nixon-Pearson, O.J., Kratz, J., Ivanov, D.S., Partridge. I.K., Potter. K.D., Hallett, S.R., Understanding and predicting defect formation in automated fibre placement pre-preg laminates

Composites Part A: Applied Science and Manufacturing, 2017; 102 (1): 196-206

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2017.08.008

Corbridge, D.M., Harper, L.T., de Focatiis, D.S.A., Warrior, N., Compression moulding of composites with hybrid fibre architectures

Composites Part A: Applied Science and Manufacturing, 2017; 95 (1): 87-99

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2016.12.018

Hartley, J.W., Kratz, J., Ward, C., Partridge, I.K., Effect of tufting density and loop length on the crushing behaviour of tufted sandwich specimens

Composites Part B: Engineering, 2017; 112 (1): 49-56

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesb.2016.12.037

Jones, H., Roudaut, A., Chatzimichali, A., Potter, K., Ward, C., The Dibber: Designing a standardised handheld tool for lay-up tasks

Applied Ergonomics, 2017; 65 (1): 240-254

Grant Number: EP/I033513/1

doi: 10.1016/j.apergo.2017.05.014

Matveev, M.Y., Long, A.C., Brown, L.P., Jones, I.A., Effects of layer shift and yarn path variability on mechanical properties of a twill weave composite

Journal of Composite Materials, 2017; 51 (7): 913-925

Grant Number: EP/I033513/1

doi: 10.1177/0021998316655870

Nixon-Pearson, O.J., Belnoue, J.P-H., Ivanov, D.S., Potter, K., Hallett, S., An experimental investigation of the consolidation behaviour of uncured prepregs under processing conditions

Journal of Composite Materials, 2017; 51 (13): 1911-1924

Grant Number: EP/I033513/1

doi: 10.1177/0021998316665681

Prabhu, V.A., Elkington, M., Crowley, D., Tiwari, A., Ward, C., Digitisation of manual composite layup task knowledge using gaming technology

Composites Part B: Engineering, 2017; 112 (1): 314-326

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesb.2016.12.050

Thompson, A.J., El Said, B., Ivanov, D., Belnoue, J.P-H., Hallett, S.R., High fidelity modelling of the compression behaviour of 2D woven fabrics

International Journal of Solids and Structures, 2017; in press ( in press): in press

Grant Number: EP/I033513/1

doi: 10.1016/j.ijsolstr.2017.06.027

Di Francesco, M., Veldenz, L., Dell'Anno,G., Potter, K., Heater power control for multi-material, variable speed Automated Fibre Placement

Composites Part A: Applied Science and Manufacturing, 2017; 101 (): 408-421

Grant Number: EP/P006701/1

https://doi.org/10.1016/j.compositesa.2017.06.015

Gommer, F., Endruweit, A., Long, A.C., Influence of the micro-structure on saturated transverse flow in fibre arrays

Journal of Composite Materials, 2017; 52 (): 2463-2475

Grant Number: EP/IO33513/1

https://doi.org/10.1177/0021998317747954

Belnoue J., Tassos, M., Nixon-Pearson, O., Kratz, J., Ivanov, D., Partridge, I., Potter, K., Hallett, S., Understanding and Predicting Defect Formation in Automated Fibre Placement Prepreg Laminates

Composites Part A: Applied Science and Manufacturing, 2017; 102 (1): 196-206

Grant Number: EP/IO33513/1

https://doi.org/10.1016/j.compositesa.2017.08.008

Yan, S., Zeng, X., Brown, L.P., Long, A.C., Geometric Modeling of 3D Woven Preforms in Composite T-joints

Textile Research Journal, 2017; 88 (16): 1862-1875

Grant Number: EP/IO33513/1

https://doi.org/10.1177/0040517517712098

2016

Belnoue, J.P-H., Nixon-Pearson, O.J., Ivanov, D., Hallett, S., A novel hyper-viscoelastic model for consolidation of toughened prepregs under processing conditions

Mechanics of Materials Volume, 2016; 97 (1): 118-134

Grant Number: EP/I033513/1

doi: 10.1016/j.mechmat.2016.02.019

Evans, A.D., Qian, C.C., Turner, T.A., Harper, L.T., Warrior, N.A., Flow characteristics of carbon fibre moulding compounds

Composites Part A: Applied Science and Manufacturing, 2016; 90 (1): 1-12

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2016.06.020

Gommer, F., Endruweit, A., Long, A.C., Quantification of micro-scale variability in fibre bundles

Composites Part A: Applied Science and Manufacturing, 2016; 87 (1): 131-137

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2016.04.019

Gommer, F., Brown, L.P., Wedgwood, K.C.A., Analytical method using gamma functions for determining areas of power elliptical shapes for use in geometrical textile models

Composites Part A: Applied Science and Manufacturing, 2016; 81 (1): 222-224

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2015.11.031

Gommer, F., Brown, L.P., Brooks, R., Quantification of mesoscale variability and geometrical reconstruction of a textile

Journal of Composite Materials, 2016; 50 (23): 3255-3266

Grant Number: EP/I033513/1

doi: 10.1177/0021998315617819

Harrison, P., Modelling the forming mechanics of engineering fabrics using a mutually constrained pantographic beam and membrane mesh

Composites Part A: Applied Science and Manufacturing, 2016; 81 (1): 145-157

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2015.11.005

Hunt, C., Kratz, J., Partridge, I.K., Cure path dependency of mode I fracture toughness in thermoplastic particle interleaf toughened prepreg laminates

Composites Part A: Applied Science and Manufacturing, 2016; 87 (1): 109-114

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2016.04.016

Mesogitis, T., Skordos, A., Long, A.C., Stochastic heat transfer simulation of the cure of advanced composites

Journal of Composite Materials, 2016; 50 (21): 2971-2986

Grant Number: EP/I033513/1

doi: 10.1177/0021998315615200

Selver, E., Potluri, P., Hogg, P., Soutis, C., Impact damage tolerance of thermoset composites reinforced with hybrid commingled yarns

Composites Part B: Engineering, 2016; 91 (1): 522-538

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesb.2015.12.035

2015

Chatzimichali, A.P., Potter, K.D., Building material capabilities: A socio-technical analysis of composite product development and manufacturing strategy

International Journal of Markets and Business Systems, 2015; 1 (3): 196-216

Grant Number: EP/I033513/1

doi: 10.1504/IJMABS.2015.073527

Chen, S., Endruweit, A., Harper, L.T., Warrior, N.A., Inter-ply stitching optimisation of highly drapeable multi-ply preforms

Composites Part A: Applied Science and Manufacturing, 2015; 71 (1): 144-156

Grant Number: EP/I033513/1

doi: doi.org/10.1016/j.compositesa.2015.01.016

Elkington, M., Ward, C., Chatzimichali, A.P., Potter, K.D., Studying the effects of preshearing on hand layup

Advanced Manufacturing Polymer and Composites Science, 2015; 1 (2): 80-93

Grant Number: EP/I033513/1

doi 10.1179/2055035914Y.0000000007

Elkington, M., Bloom, L.D., Chatzimichali, A.P., Ward, C., Potter, K.D., Hand layup: Understanding the manual process

Advanced Manufacturing Polymer and Composites Science, 2015; 1 (3): 138-151

Grant Number: EP/I033513/1

doi: 10.1179/2055035915Y.0000000003

Endruweit, A., Zeng, X., Long. A.C., Effect of specimen history on structure and in-plane permeability of woven fabrics

Journal of Composite Materials, 2015; 49 (13): 1563-1578

Grant Number: EP/I033513/1

doi: 10.1177/0021998314536070

Endruweit, A., Zeng, X., Long, A.C., Multi-scale modelling of combined deterministic and stochastic fabric non-uniformity for realistic resin injection simulation

Advanced Manufacturing: Polymer and Composites Science, 2015; 1 (1): 3-15

Grant Number: EP/I033513/1

doi: 1179/2055035914Y.0000000002

Gommer, F., Wedgwood, K.C.A., Brown, L.P., Stochastic reconstruction of filament paths in fibre bundles based on two-dimensional input data

Composites Part A: Applied Science and Manufacturing, 2015; 76 (1): 262-271

Grant Number: EP/I033513/1

doi: http://dx.doi.org/10.1016/j.compositesa.2015.05.022

Ivanov, D.S., White, J.A.P., Hendry, W., Mahadik, Y., Minett, V., Patel, H., Ward, C., Novel method of stabilising textile preforms by means of liquid resin print

Advanced Manufacturing: Polymer & Composites Science, 2015; 1 (1): 26-35

Grant Number: EP/I033513/1

doi: 10.1179/2055035914Y.0000000006

Keller, A., Masania, K., Taylor, A.C., Dransfeld, C., Fast-curing epoxy polymers with silica nanoparticles: properties and rheo-kinetic modelling

Journal of Materials Science, 2015; 51 (1): 236-251

Grant Number: EP/I033513/1

doi: 10.1007/s10853-015-9158-y

Lewandowska, A., Soutis, C., Savage, L., Eichhorn, S., Carbon fibres with ordered graphitic-like aggregate structures from a regenerated cellulose fibre precursor

Composites Science and Technology, 2015; 116 (1): 50-57

Grant Number: EP/I033513/1

doi: 10.1016/j.compscitech.2015.05.009

Mesogitis, T., Skordos, A., Long, A.C., Stochastic simulation of the influence of cure kinetics uncertainty on composites cure

Composites Science and Technology, 2015; 110 (1): 145-151

Grant Number: EP/I033513/1

doi: 10.1016/j.compscitech.2015.02.009

Napper, M., Bloom, D.L., Ward, C., Potter, K., On the evolution of the distribution of entrapped air at the tool/first ply interface during lay-up and debulk

Advanced Manufacturing: Polymer & Composites Science, 2015; 1 (1): 36-43

Grant Number: EP/I033513/1

doi: 10.1179/2055035914Y.0000000005

Selver, E., Potluri, P., Soutis, C., Hogg, P., Healing potential of hybrid materials for structural composites

Composite Structures, 2015; 122 (1): 57-66

Grant Number: EP/I033513/1

doi:10.1016/j.compstruct.2014.11.027

Xiao, X., Long, A.C., Zeng, X., Through-thickness permeability modelling of woven fabric under out-of-plane deformation

Journal of Materials Science, 2015; 49 (21): 7563-7574

Grant Number: EP/I033513/1

doi: 10.1007/s10853-014-8465-z

Xiao, X., Endruweit, A., Zeng, X., Hu, J., Long, A.C., Through-thickness permeability study of orthogonal and angle-interlock woven fabrics

Journal of Materials Science, 2015; 50 (3): 1257-1266

Grant Number: EP/I033513/1

doi: 10.1007/s10853-014-8683-4

Xiao, X., Hu, J., Hua, T., Zeng, X., Long, A.C., Through-thickness air permeability of woven fabric under low pressure compression

Textile Research Journal, 2015; 85 (16): 1732-1742

Grant Number: EP/I033513/1

doi: 10.1177/0040517515569526

Zeng, X., Sturrock, C., Mooney, S., Assessing the effect of fibre extraction processes on the strength of flax fibre reinforcement

Composites Part A: Applied Science and Manufacture, 2015; 70 (1): 1-7

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2014.12.004

Zeng, X., Endruweit, A., Brown, L.P., Long, A.C., Numerical Prediction of In-plane Permeability for Multi-layer Woven Fabrics with Manufacture-induced Deformation

Composites Part A: Applied Science and Manufacturing, 2015; 77 (1): 266-274

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2015.03.027

Matveev, M., Long, A.C., Numerical modelling for predicting failure in textile composites

Numerical Modelling of Failure in Advanced Composite Materials (eds. P.P. Camanho, S.R. Hallett), 2015; Sawston (Woodhead Publishing): 435-455

Grant Number: EP/I033513/1

doi: 10.1016/B978-0-08-100332-9.00016-5

2014

Aktas, A., Potluri, P., Needle penetration through polymeric cellular foams

Mechanics of Advanced Materials and Structures, 2014; 22 (10): 794-802

Grant Number: EP/I033513/1

doi: 10.1080/15376494.2013.845274

Chakladar, N.D., Mandal, P., Potluri, P., Effects of inter-tow angle and tow size on carbon fibre friction

Composites Part A: Applied Science and Manufacturing, 2014; 65 (1): 115-124

Grant Number: EP/I033513/1

doi: 10.1016/j.composites.2014.06.002

Chehura, E., Dell’Anno, G., Huet, T., Staines, S., James, S., Partridge, I., Tatam, R., On-line monitoring of multi-component strain development in a tufting needle using optical fibre Bragg grating sensors

Smart Materials and Structures, 2014; 23 (7): 75001

Grant Number: EP/I033513/1

doi: 10.1088/0964-1726/23/7/075001

Gommer, F., Endruweit, A., Long, A.C., Analysis of filament arrangements and generation of statistically equivalent composite micro-structures

Composites Science and Technology, 2014; 99 (1): 45-51

Grant Number: EP/I033513/1

doi: 10.1016/j.compscitech.2014.05.008

Guan, Z., Aktas, A., Potluri, P., Cantwell, W.J., Landon, G., Nurick, G.N., The Blast resistance of Stitched Sandwich Panels

International Journal of Impact Engineering, 2014; 65 (1): 553-568

Grant Number: EP/I033513/1

doi: 10.1016/j.ijimpeng.2013.12.001

Ivanov, D.S., Lomov, S.V., Compaction behaviour of dense sheared woven preforms: Experimental observations and analytical predictions

Composites Part A: Applied Science and Manufacturing, 2014; 64 (1): 167-176

Grant Number: EP/I033513/1

doi: /10.1016/j.compositesa.2014.05.002

Kim, B.C., Weaver, P.M., Potter, K.D., Manufacturing characteristics of the continuous tow shearing method for manufacturing of variable angle tow composites

Composites Part A: Applied Science and Manufacturing, 2014; 61 (1): 141-151

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2014.02.019

Mesogitis, T., Skordos, A., Long, A.C., Uncertainty in the manufacturing of fibrous thermosetting composites: A review

Composites Part A: Applied Science and Manufacturing, 2014; 57 (1): 67-75

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2013.11.004

Such, M.C., Ward, C., Hutabarat, W., Tiwari, A., Intelligent composite lay-up by the application of discrete technologies

Procedia CIRP, 2014; 25 (1): 122-131

Grant Number: EP/I033513/1

doi: 10.1016/j.procir.2014.10.020

Such, M.C., Ward, C., Potter, K., Aligned discontinuous short fibre composites: a short history

Journal of Multifunctional Composites, 2014; 2 (3): 155-168

Grant Number: EP/I033513/1

doi: 10.12783/issn.2168-4286/2/3/4/Such

Vernet, N., Ruiz, E., Advani, S., Alms, J., Aubert, M., Barburski, M., Barari, B., Beraud, J., Berg, D., Correia, N., et al., Experimental determination of the permeability of engineering textiles: Benchmark II

Composites Part A: Applied Science and Manufacturing, 2014; 61 (1): 172-184

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2014.02.010

Zeng, X., Brown, L.P., Endruweit, A., Matveev, M., Long, A.C., Geometrical modelling of 3D woven reinforcements for polymer composites: Prediction of fabric permeability and composite mechanical properties

Composites Part A: Applied Science and Manufacture, 2014; 56 (1): 150-160

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2013.10.004

Potter, K., Ward, C., Draping processes for composites manufacture

Advances in composites manufacturing and process design (ed. P. Boisse), 2014; Sawston (Woodhead Publishing): 93-109

Grant Number: EP/I033513/1

doi: 10.1016/B978-1-78242-307-2.00005-1

Snudden, J.P., Ward C., Potter, K., Reusing automotives composites production waste – a possible high value solution

Reinforced Plastics, 2014; 58 (6): 20-27

Grant Number: EP/I033513/1

doi:10.1016/S0034-3617(14)70246-2

2013

Aktas, A., Potluri, P., Porat, I., Development of Through-Thickness Reinforcement in Advanced Composites Incorporating Rigid Cellular Foams

Applied Composite Materials, 2013; 20 (4): 553-568

Grant Number: EP/I033513/1

doi: 10.1007/s10443-012-9285-4.

Bloom, L.D., Wang, J., Potter, K.D., Damage progression and defect sensitivity: An experimental study of representative wrinkles in tension

Composites: Part B, 2013; 45 (1): 449-458

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesb.2012.05.021

Crossley, R.J., Schubel, P.J., de Focatiis, D.S.A., Time-temperature equivalence in the tack and dynamic stiffness of polymer prepreg and its application to automated composites manufacturing

Composites Part A: Applied Science and Manufacturing, 2013; 52 (1): 126-133

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2013.05.002

Endruweit, A., Gommer, F., Long, A.C., Stochastic analysis of fibre volume fraction and permeability in fibre bundles with random filament arrangement

Composites Part A: Applied Science and Manufacturing, 2013; 49 (1): 109-118

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2013.02.012

Hamdani, S.T.A., Potluri, P., Fernando, A., Thermo-mechanical behaviour of textile heating fabric based on silver coated polymeric yarn

Materials, 2013; 6 (3): 1072-1089

Grant Number: EP/I033513/1

doi: 10.3390/ma6031072

Lemanski, S.L., Wang, J., Sutcliffe, M.P.F., Potter K.D., Wisnom M.R., Modelling failure of composite specimens with defects under compression loading

Composites Part A: Applied Science and Manufacturing, 2013; 48 (1): 26-36

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2012.12.007

Li, M., Yuan C., Wang, S.K., Gu, Y.Z., Potter, K., Zhang, Z.G., Evolution of the wettability between carbon fiber and epoxy as a function of temperature and resin curing

Applied Polymer Science, 2013; 128 (6): 4095-4101

Grant Number: EP/I033513/1

doi: 10.1002/app.38634

Lightfoot, J.S., Wisnom, M.R., Potter, K., A new mechanism for the formation of ply wrinkles due to shear between plies

Composites Part A: Applied Science and Manufacturing, 2013; 49 (1): 139-147

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2013.03.002

Lightfoot, J.S., Wisnom, M.R., Potter, K., Defects in woven preforms: Formation mechanisms and the effects of laminate design and layup protocol

Composites Part A: Applied Science and Manufacturing, 2013; 51 (1): 99-107

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2013.04.004

Lukaszewicz, D.H.A., Potter, K.D., Eales, J., A concept for the in situ consolidation of thermoset matrix prepreg during automated lay-up

Composites Part B: Engineering, 2013; 45 (1): 538-543

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesb.2012.09.008

Mahadik, Y., Potter, K., Experimental investigation into the thermoelastic spring-in of curved sandwich panels

Composites Part A: Applied Science and Manufacturing, 2013; 49 (1): 68-80

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2013.02.006

Mills-Brown, J., Potter, K., Foster, S., Batho, T., Thermal and tensile properties of polysialate composites

Ceramics International, 2013; 39 (8): 8917-8924

Grant Number: EP/I033513/1

doi:10.1016/j.ceramint.2013.04.087

Mills-Brown, J., Potter, K., Foster, S., Batho, T., The development of a high temperature tensile testing rig for composite laminates

Composites Part A: Applied Science and Manufacturing, 2013; 52 (1): 99-105

Grant Number: EP/I033513/1

doi:10.1016/j.compositesa.2013.04.009

Volkova, E.I., Jones, I.A., Brooks, R., Zhu, Y., Bichoutskaia, E., Meso-scale modelling of shock wave propagation in a SiC/Al nanocomposite reinforced with WS2-inorganic fullerene nanoparticles

Composite Structures, 2013; 96 (1): 601-605

Grant Number: EP/I033513/1

doi:10.1016/j.compstruct.2012.08.039

Wan, T., Liao, S., Wang, K., Yan, P., Clifford, M., Multi-scale hybrid polyamide 6 composites reinforced with nano-scale clay and micro-scale short glass fibre

Composites Part A: Applied Science and Manufacturing, 2013; 50 (1): 31-38

Grant Number: EP/I033513/1

doi:10.1016/j.compositesa.2013.03.009

Wang, J., Potter, K., Etches, J.A., Experimental investigation and characterisation techniques of compressive fatigue failure of composites with fibre waviness at ply drops

Composite Structures, 2013; 100 (1): 398-403

Grant Number: EP/I033513/1

doi:10.1016/j.compstruct.2013.01.010

Wang, J., Potter, K.D., Wisnom, M.R., Hazra, K., Failure mechanisms under compression loading in composites with designed out-of-plane fibre waviness

Plastics, Rubber and Composites, 2013; 42 (6): 231-238

Grant Number: EP/I033513/1

doi.org/10.1179/1743289812Y.0000000019

Zeng, X., Brown, L.P., Endruweit, A., Matveev, M., Long, A.C., Advanced geometry modelling for 3D woven fabrics in composites processing and performance analysis

JEC Composites Magazine, 2013; 50 (82): 55-60

Grant Number: EP/I033513/1

ISSN: 1639965X

Crowley, D., Ward, C., Potter, K., Kasyutich, O., Jonas, K., Jennings, N., A study into composite laminators’ motivation

Advances in Sustainable and Competitive Manufacturing Systems. Lecture Notes in Mechanical Engineering (ed. A. Azevedo), 2013; Springer (Heidelberg): 971-984

Grant Number: EP/I033513/1

doi: 10.1007/978-3-319-00557-7_80

2012

Abdiwi, F., Harrison, P., Koyama, I., Yu, W-R., Long, A., Correia, N., Guo, Z., Characterising and modelling variability of tow orientation in engineering fabrics and textile composites

Composites Science and Technology, 2012; 72 (9): 1034-1041

Grant Number: EP/I033513/1

doi:10.1016/j.compscitech.2012.03.017

Hazra, K., Blake, S., Potter, K., Wisnom, M.R., In-process fiber orientation measurement and foreign object damage (FOD) prevention for complex preform or prepreg lay-ups

Society for the Advancement of Material and Process Engineering Journal, 2012; 48 (1): 6-11

Grant Number: EP/I033513/1

http://www.nxtbook.com/nxtbooks/sampe/journal_20120102/index.php?startid=6

Kim, B.C., Potter, K., Weaver, P.M., Continuous tow shearing for manufacturing variable angle tow composites

Composites Part A: Applied Science and Manufacturing, 2012; 43 (8): 1347-1356

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2012.02.024

Li, M., Wang, S-K., Gu, Y-Z., Li, Y-X., Potter, K., Zhang, Z-G, Evaluation of through-thickness permeability and the capillary effect in vacuum assisted liquid molding process

Composites Science and Technology, 2012; 72 (8): 873-878

Grant Number: EP/I033513/1

doi: 10.1016/j.compscitech.2012.02.014

Li, H., Kandare, E., Li, S., Wang, Y., Kandola, B.K., Myler, P., Horrocks, A.R., Integrated thermal, micro- and macro-mechanical modelling of post-fire flexural behaviour of flame-retarded glass/epoxy composites

Computational Materials Science, 2012; 59 (1): 22-32

Grant Number: EP/I033513/1

doi:10.1016/j.commatsci.2012.02.026

Lin, H., Clifford, M.J., Long, A.C., Lee, K.S., Guo, N., A finite element approach to the modelling of fabric mechanics and its application to virtual fabric design and testing

Journal of the Textile Institute, 2012; 103 (10): 1063-1076

Grant Number: EP/I033513/1

doi: 10.1080/00405000.2012.660755

Lin, H., Ramgulam, R., Arshad, H., Clifford, M.J., Potluri, P., Long, A.C., Multi-scale integrated modelling for high performance flexible materials

Computational Materials Science, 2012; 65 (1): 276-286

Grant Number: EP/I033513/1

doi: 10.1016/j.commatsci.2012.07.017

Lin, H., Zeng, X., Sherburn, M., Long, A.C., Clifford, M.J., Automated geometric modelling of textile structures

Textile Research Journal, 2012; 82 (16): 1689-1702

Grant Number: EP/I033513/1

doi: 10.1177/0040517511418562

Lukaszewicz, D.H.A., Ward, C., Potter, K.D., The engineering aspects of automated prepreg layup: history, present and future

Composites Part B: Engineering, 2012; 43 (1): 997-1009

Grant Number: EP/I033513/1

 doi: 10.1016/j.compositesb.2011.12.003

Potluri, P., Jetavat, D., Hogg, P., Innovative material systems for composite vehicle systems

International Journal of Vehicle Structures and Systems, 2012; 4 (3): 86-91

Grant Number: EP/I033513/1

 doi: dx.doi.org/10.4273/ijvss.4.3.02

Potluri, P., Ramgulam, R., Arshad, H., Chilo, M., Tow-scale Mechanics for Composite Forming Simulations

Key Engineering Materials, 2012; 504-506 (1): 255-260

Grant Number: EP/I033513/1

doi: 10.4028/www.scientific.net/KEM.504-506.255

Potluri, P., Hogg, M., Arshad, H., Jetavat, D., Jamshidi, P., Influence of Fibre Architecture on Impact Damage Tolerance in 3D Woven Composites

Applied Composite Materials, 2012; 19 (1): 799-812

Grant Number: EP/I033513/1

doi:10.1007/s10443-012-9256-9

Raju, G., Wu, Z., Kim, B.C., Weaver, P.M., Prebuckling and buckling analysis of variable angle tow plates with general boundary conditions

Composite structures, 2012; 94 (9): 2961-2970

Grant Number: EP/I033513/1

doi:10.1016/j.compstruct.2012.04.002

Sherburn, M., Long, A.C., Jones, I.A., Crookston, J., Brown, L., Prediction of textile geometry using an energy minimization approach

Journal of Industrial Textiles, 2012; 41 (4): 345-369

Grant Number: EP/I033513/1

doi: 10.1177/1528083711420747

Volkova, E.I., Jones, I.A., Brooks, R., Zhu, Y., Bichoutskaia, E., Sequential multiscale modelling of SiC/Al nanocomposites reinforced with WS 2 nanoparticles under static loading

Physical Review B – Condensed Matter and Materials Physics, 2012; 86 (10): 104111

Grant Number: EP/I033513/1

doi: 10.1103/PhysRevB.86.104111

Wang, J., Potter, K.D., Hazra, K., Wisnom, M.R., Experimental fabrication and characterization of out-of-plane fiber waviness in continuous fiber-reinforced composites

Composite Materials, 2012; 46 (17): 2041-2053

Grant Number: EP/I033513/1

doi: 10.1177/0021998311429877

Wu, Z., Weaver, P.M., Raju, G., Kim, B.C., Buckling analysis and optimisation of variable angle tow composite plates

Thin-Walled Structures, 2012; 60 (1): 163-172

Grant Number: EP/I033513/1

doi:10.1016/j.tws.2012.07.008

Xiao, X., Zeng, X., Long, A., Lin, H., Clifford, M., Saldaeva, E., An analytical model for through-thickness permeability of woven fabric

Textile Research Journal, 2012; 82 (5): 492-501

Grant Number: EP/I033513/1

doi: 10.1177/0040517511414979

Potluri, P., Braiding

International Encyclopedia of Composites (eds. L. Nicolais, A. Borzacchiello), 2012; New York (John Wiley): n.p.

Grant Number: EP/I033513/1

doi: 10.1002/9781118097298.weoc020

Harrison, P., Abdiwia, F., Guo, Z., Potluri, P., Yu, W-R., Characterising the shear–tension coupling and wrinkling behaviour of woven engineering fabrics

Composites Part A: Applied Science and Manufacturing, 2012; 43 (6): 903-914

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2012.01.024

Harper, L.T., Qian, C., Turner, T.A., Li, S., Warrior, N.A., Representative volume elements for discontinuous carbon fibre composites – Part 1: Boundary conditions

Composites Science and Technology, 2012; 72 (2): 225-234

Grant Number: EP/I033513/1

doi: 10.1016/j.compscitech.2011.11.006

Harper, L.T., Qian, C., Turner, T.A., Li, S., Warrior, N.A., Representative volume elements for discontinuous carbon fibre composites – Part 2: Determining the critical size

Composites Science and Technology, 2012; 72 (2): 204-210

Grant Number: EP/I033513/1

doi: 10.1016/j.compscitech.2011.11.003

2011

Endruweit, A., Glover, P., Head, K., Long, A., Mapping of the fluid distribution in impregnated reinforcement textiles using Magnetic Resonance Imaging: Application and discussion

Composites Part A: Applied Science and Manufacturing, 2011; 42 (1): 1369-1379

Grant Number: EP/I033513/1

10.1016/j.compositesa.2010.11.012

Lukaszewicz, D.H.A., Potter, K., The internal structure and conformation of prepreg with respect to reliable automated processing

Composites Part A: Applied Science and Manufacturing, 2011; 42 (3): 283-292

Grant Number: EP/I033513/1

doi: 10.1016/j.compositesa.2010.11.014

Lukaszewicz, D.H.A., Potter, K., Through-thickness compression response of uncured prepreg during manufacture by automated layup

Proceedings of the Institution Mechanical Engineers Part B: Journal of Engineering Manufacture, 2011; 226 (2): 193-202

Grant Number: EP/I033513/1

doi: 10.1177/0954405411411817

Scholz, M., Blanchfield, J.P., Bloom, D., Coburn, B.H., Elkington, M.P., Fuller, J.D., Gilbert, M.E., Muflahi, S.A., Pernice, M.F., Rae, S.I., Trevarthen, J.A., White, S.C., Weaver, P.M., Bond, I.P., The use of composite materials in modern and orthopaedic medicine and prosthetic devices: A review

Composites Science and Technology, 2011; 71 (16): 1791-1803

Grant Number: EP/I033513/1

doi:10.1016/j.compscitech.2011.08.017

Ward, C., Hazra, K., Potter, K., Development of the manufacture of complex composite panels

International Journal of Materials and Product Technology, 2011; 42 ( 3-4): 131-155

Grant Number: EP/I033513/1

doi: /10.1504/IJMPT.2011.045460

Abdiwi, F., Harrison, P., Guo, Z., Potluri, P., Yu, W-R., Measuring the Shear-Tension Coupling of Engineering Fabrics

American Institute of Physics Proceedings, 2011; 1353 (1): 889-894

Grant Number: EP/I033513/1

doi: 10.1063/1.3589628

Long, A.C., Brown, L.P., Modelling the geometry of textile reinforcements for composites: TexGen

Composite Reinforcements for Optimum Performance (ed. P. Boisse), 2011; Sawston (Woodhead Publishing): 239-264

Grant Number: EP/I033513/1

ISSN: 9780857093714

Potluri, P., Nawaz, S., Developments in braided fabrics

Specialist Yarn and Fabric Structures: Developments and Applications (ed. H. Gong), 2011; Sawston (Woodhead Publishing): 333-353

Grant Number: EP/I033513/1

doi: 10.1533/9780857093936.333

Schubel, P.J., Crossley, R.J., Wind turbine blade design

Wind Turbine Technology - Principles and Design (ed. M. Adaramola), 2011; Florida (CRC Press): 1-34

Grant Number: EP/I033513/1

ISBN: 9781771880152
Copyright © 2020 CIMComp