CIMComp Publications

Jump to:
Journal Papers
Conference Papers
Book Section

Journal Papers

Abdiwi F, P Harrison, I Koyama, W-R Yu, A C Long, N Correia, Z Guo.
Characterising and modelling variability of tow orientation in engineering fabrics and textile composites, Composites Science & Technology, 2012; 72: 1034-1041.
doi: 10.1016/j.compscitech.2012.03.017

Aktas A, P Potluri, Needle penetration through polymeric cellular foams, Mechanics of Advanced Materials and Structures, 2014
doi: 10.1080/ (PDL)76494.2013.845274

Aktas A, P. Potluri, I. Porat. Development of Through-Thickness Reinforcement in Advanced Composites Incorporating Rigid Cellular Foams.
Applied Composite Materials, 20(4), 2013: 553-568
doi: 10.1007/s10443-012-9285-4

Bloom L.D., Wang J., Potter K.D. Damage progression and defect sensitivity: An experimental study of representative wrinkles in tension, 2013,
Composites: Part B 45 (1) 449-458
doi: 10.1016/j.compositesb.2012.05.021

Chakladar N D,  Mandal P, Potluri P, Effects of inter-tow angle and tow size on carbon fibre friction, 2014 (in-print)
doi: 10.1016/j.composites.2014.06.002

Chatzimichali, A.P., Potter, K.D., Building material capabilities: A socio-technical analysis of composite product development and manufacturing strategy, International Journal of Sustainable Manufacturing (IJSM)

Crossley, R.J., Schubel, P.J., de Focatiis, D.S.A.  Time-temperature equivalence in the tack and dynamic stiffness of polymer prepreg and its application to automated composites manufacturing, (2013) Composites Part A: Applied Science and Manufacturing, 52, pp. 126-133
doi: 10.1016/j.compositesa.2013.05.002

Elkington M, C Ward C, A P Chatzimichali, K D Potter. (2015) “Studying the effects of preshearing on hand layup”. AMPCS 1 (2), 80-93
ISBN: 9780000000002

Elkington M, L D Bloom, A P Chatzimichali, C Ward, K D Potter. (2015) “Hand layup: Understanding the manual process”. AMPCS, Advanced article
doi: 10.1179/2055035915Y.0000000003

Endruweit A, X Zeng, A C Long. “Multi-scale modelling of combined deterministic and stochastic fabric non-uniformity for realistic resin injection simulation”, Advanced Manufacturing: Polymer and Composites Science, v1, n1, 2015, pp. 3-15.
doi: 1179/2055035914Y.0000000002

Endruweit A, X Zeng, A C Long. “Effect of specimen history on structure and in-plane permeability of woven fabrics”, Journal of Composite Materials, v49, n13, 2015, pp. 1563-1578.
doi: 10.1177/0021998314536070

Endruweit, A., Gommer, F., Long, A.C. Stochastic analysis of fibre volume fraction and permeability in fibre bundles with random filament arrangement (2013)
Composites Part A, v49, 2013, pp. 109-118
doi: 10.1016/j.compositesa.2013.02.012

Gommer F, K C A Wedgwood, and L P Brown, “Stochastic reconstruction of filament paths in fibre bundles based on two-dimensional input data”. Composites Part A: Applied Science and Manufacturing, 2015. 76(0): p. 262-271.
doi: http://dx.doi.org/10.1016/j.compositesa.2015.05.022

Gommer F, Endruweit A, Long A C. Analysis of filament arrangements and generation of statistically equivalent composite micro-structures, Composites Science & Technology, v99, 2014, pp. 45-51.
doi: 10.1016/j.compscitech.2014.05.008

Green S D, M Y Matveev, A C Long, D Ivanov, S R Hallett. “Mechanical modelling of 3D woven composites considering realistic unit cell geometry”, Composites Structures, v118, 2014, pp. 284-293
doi:10.1016/j.compstruct.2014.07.005

Green, S.D., Long, A.C., El Said, B.S.F., Hallett, S.R.
Numerical modelling of 3D woven preform deformations, (2014) Composite Structures, v108, 2014, pp. 747-756
doi: 10.1016/j.compstruct.2013.10.015

Guan Z, A Aktas, P Potluri. W J Cantwell, G Landon, G N Nurick, “The Blast resistance of Stitched Sandwich Panels”, International Journal of Impact Engineering, 65, 2014: 553-568
doi:10.1016/j.ijimpeng.2013.12.001

Guan, A Aktas, P Potluri. WJ Cantwell, G Landon, GN Nurick, The Blast resistance of Stitched Sandwich Panels, International Journal of Impact Engineering (DOI: 10.1016/j.ijimpeng.2013.12.001)
doi: 10.1016/j.ijimpeng.2013.12.001

Hamdani STA, P Potluri, A Fernando, Thermo-mechanical of textile heating fabric based on silver coated polymeric yarn, Materials, 6(3), 2013: 1072-1089.
doi: 10.3390/ma6031072

Harper, L.T., Qian, C., Turner, T.A., Li, S., Warrior, N.A. Representative  volume elements for discontinuous carbon fibre composites – Part 2: Determining the critical size, (2012) Composites Science and Technology, 72 (2), pp. 204-210
doi: 10.1016/j.compscitech.2011.11.003

Harper, L.T., Qian, C., Turner, T.A., Li, S., Warrior, N.A.  Representative volume elements for discontinuous carbon fibre composites – Part 1: Boundary conditions, (2012) Composites Science and Technology, 72 (2), pp. 225-234
doi: 10.1016/j.compscitech.2011.11.006

Harrison P, F Abdiwia, Z Guo, P Potluri, W R Yu. “Characterising the shear–tension coupling and wrinkling behaviour of woven engineering fabrics”, Composites Part A, 2012; 43(6): 903-914
doi: 10.1016/j.compositesa.2012.01.024

Hogg P, P Potluri, Strategies for improving damage tolerance in future composite materials, Journal of Aerospace Science and Technologies, 2012

Ivanov D S, J A P White, W Hendry, Y Mahadik, V Minett, H Patel, C Ward. (2015) “Novel method of stabilising textile preforms by means of liquid resin print”. AMPCS 1 (1), 26-35
doi: http://dx.doi.org/10.1179/2055035914Y.0000000006

Kim B.C., Potter K., Weaver P.M. Continuous tow shearing for manufacturing variable angle tow composites 2012 Composites Part A 43 (8) 1347-1356
doi: 10.1016/j.compositesa.2012.02.024

Kim BC, Weaver PM, Potter KD. Manufacturing characteristics of the continuous tow shearing method for manufacturing of variable angle tow composites. Composites Part A 2014, vol 61. pp. 141-151
doi: 10.1016/j.compositesa.2014.02.019

Lemanski S.L., Wang J., Sutcliffe M.P.F., Potter K.D., Wisnom M.R.
Modelling failure of composite specimens with defects under compression loading, 2013, Composites
Part A 48, 26-36
doi: 10.1016/j.compositesa.2012.12.007

Li M., Wang S-K., Gu Y-Z., Li Y-X., Potter K., Zhang Z-G. Evaluation of through-thickness permeability and the capillary effect in vacuum assisted liquid molding process, 2012, Composites Science and Technology 72 (8) 873-878
doi: 10.1016/j.compscitech.2012.02.014

Li M., Yuan C., Wang S.K., Gu Y.Z., Potter K., Zhang Z.G. Evolution of the wettability between carbon fiber and epoxy as a function of temperature and resin curing, 2013, Applied Polymer Science 128 (6) 4095-4101
doi: 10.1002/app.38634

Li, H., Kandare, E., Li, S., Wang, Y., Kandola, B.K., Myler, P., Horrocks, A.R. Integrated thermal, micro- and macro-mechanical modelling of post-fire flexural behaviour of flame-retarded glass/epoxy composites, (2012) Computational Materials Science, 59, pp. 22-32
doi:10.1016/j.commatsci.2012.02.026

Lightfoot J.S., Wisnom M.R., Potter K.  A new mechanism for the formation of ply wrinkles due to shear between plies, 2013,
Composites: Part A 49, 139-147
doi: 10.1016/j.compositesa.2013.03.002

Lightfoot J.S., Wisnom M.R., Potter K.  Defects in woven preforms: Formation mechanisms and the effects of laminate design and layup protocol,
doi: 10.1016/j.compositesa.2013.04.004

Lin H, M J Clifford, A C Long, K S Lee, N Guo.  A finite element approach to the modelling of fabric mechanics and its application to virtual fabric design and testing,
Journal of the Textile Institute, 2012; 103(10): 1063-1076
doi: 10.1080/00405000.2012.660755

Lin H, R Ramgulam, H Arshad, MJ Clifford, P Potluri, A C Long. Multi-scale integrated modelling for high performance flexible materials, Computational Materials Science, 2012; 65:276-286
doi: 10.1016/j.commatsci.2012.07.017

Lin H, X Zeng, M Sherburn, A C Long, M J Clifford. “Automated geometric modelling of textile structures”, Textile Research Journal, 2012; 82(16): 1689-1702.                                    
doi: 10.1177/0040517511418562

Lukaszewicz D. H-J. A., Ward C., Potter K.D.
The engineering aspects of automated prepreg layup: history, present and future 2012
Thin-Walled Structures 60, 163-172
 doi: 10.1016/j.compositesb.2011.12.003

Lukaszewicz D.H.A., Potter K. The internal structure and conformation of prepreg with respect to reliable automated processing 2011
Composites: Part A 42 (3) 283 – 292
doi:10.1016/j.compositesa.2010.11.014

Lukaszewicz D.H.A., Potter K. Through-thickness compression response of uncured prepreg during manufacture by automated layup, 2011 Proc Institution Mechanical Engineers Part B: J Engineering Manufacture 226 (2) 193-202
doi: 10.1177/0954405411411817

Lukaszewicz D.H.-J.A., Potter K.D., Eales J. A concept for the in situ consolidation of thermoset matrix prepreg during automated lay-up, 2013, Composites: Part B (1) 538-543
doi: 10.1016/j.compositesb.2012.09.008

Mahadik Y., Hallett S.R.  Effect of fabric compaction and yarn waviness on 3D woven composite compressive properties 2011
Composites: Part A 42 (11) 1592-1600
doi:10.1016/j.compositesa.2011.07.006

Mahadik Y., Potter K. Experimental investigation into the thermoelastic spring-in of curved sandwich panels, 2013, Composites: Part A 49, 68-80
doi: 10.1016/j.compositesa.2013.02.006

Mesogitis T, A Skordos, A C Long. “Stochastic simulation of the influence of cure kinetics uncertainty on composites cure”, Composites Science & Technology, v110, 2015, pp. 145-151. 
doi:10.1016/j.compscitech.2015.02.009

Mesogitis, T., Skordos, A., Long, A.C, Uncertainty in the manufacturing of fibrous thermosetting composites: A review (2014)
Composites Part A, v57, pp. 67-75
doi:10.1016/j.compositesa.2013.11.004

Mills-Brown J., Potter K., Foster S., Batho T,  The development of a high temperature tensile testing rig for composite laminates, 2013, Composites: Part A, 99-105
doi:10.1016/j.compositesa.2013.04.009

Mills-Brown J., Potter K., Foster S., Batho T, Thermal and tensile properties of polysialate composites, 2013, Ceramics International 39 (8) 8917-8924
doi:10.1016/j.ceramint.2013.04.087

Napper M, D L Bloom, C Ward, Potter K. (2015) “On the evolution of the distribution of entrapped air at the tool/first ply interface during lay-up and debulk”. AMPCS 1 (1), 36-43
doi: http://dx.doi.org/10.1179/2055035914Y.0000000005

Potluri, P. Hogg, M. Arshad, D. Jetavat, P. Jamshidi. Influence of Fibre Architecture on Impact Damage Tolerance in 3D Woven Composites. Applied Composite Materials. 2012 October; 19: 799-812. eScholarID:176913|
doi:10.1007/s10443-012-9256-9

Potluri P, D Jetavat, P Hogg, Innovative material systems for composite vehicle systems, International Journal of Vehicle Structures and Systems, 4(3),2012:86-91
 doi: dx.doi.org/10.4273/ijvss.4.3.02

Potluri P, R Ramgulam, H Arshad, M Chilo, Tow-scale Mechanics for Composite Forming Simulations, Key Engineering Materials, 504,2012: 255-260
doi: 10.4028/www.scientific.net/KEM.504-506.255

Potluri P, P Hogg, M Arshad, D Jetavat, P Jamshidi. “Influence of fibre architecture on impact damage tolerance in 3D woven composites”, Applied Composite Materials, 2012;
19(5):799-812.
doi: 10.1007/s10443-012-9256-9

Raju G., Wu Z., Kim B.C., Weaver P.M. Prebuckling and buckling analysis of variable angle tow plates with general boundary conditions 2012
Composite structures 94 (9) 2961-2970
doi:10.1016/j.compstruct.2012.04.002

Scholz M, Blanchfield J.P, Bloom D, Coburn B.H, Elkington M.P, Fuller J.D, Gilbert M.E., Muflahi S.A,  Pernice M.F, Rae S.I., Trevarthen J.A., White S.C., Weaver P.M., Bond, I.P.
The use of composite materials in modern and orthopaedic medicine and prosthetic devices: A review  2011,Composites Science & Technology 71 (16) 1791-1803
doi:10.1016/j.compscitech.2011.08.017

Selver E, P Potluri, C Soutis, P Hogg, “Healing potential of hybrid materials for structural composites”, Composite Structures 122, 57-66
doi:10.1016/j.compstruct.2014.11.027

Sherburn, M., Long, A.C., Jones, I.A., Crookston, J., Brown, L. Prediction of textile geometry using an energy minimization approach, (2012) Journal of Industrial Textiles, v41, n4, pp 345-369
doi:10.1177/1528083711420747

Snudden J.P, Ward C., Potter K. (2014) Reusing production waste – a possible high value solution. Reinforced Plastics
doi:10.1016/S0034-3617(14)70246-2

Such M.C., Ward C., Hutabarat W., Tiwari A. (2014) Intelligent composite lay-up by the application of discrete technologies. CIRP Annuls
http://cimcomp.ac.uk

Such M.C., Ward C., Potter, K. (2014) Aligned short fibre composites: a short history. J Multifunctional Composites.
doi: 10.12783/issn.2168-4286/2/3/4

Trask R.S., Hallett S.R., Helenon F.M.M., Wisnom M.R. Influence of process induced defects on the failure of composite T-joint specimens, 2012,
Composites: Part A 43, 748-757
doi:10.1016/j.compositesa.2011.12.021

Volkova, E.I., Jones, I.A., Brooks, R., Zhu, Y., Bichoutskaia, E.  Meso-scale modelling of shock wave propagation in a SiC/Al nanocomposite reinforced with WS2-inorganic fullerene nanoparticles,
(2013) Composite Structures, 96, pp. 601-605
doi:10.1016/j.compstruct.2012.08.039

Volkova, E.I., Jones, I.A., Brooks, R., Zhu, Y., Bichoutskaia, E. Sequential multiscale modelling of SiC/Al nanocomposites reinforced with WS 2 nanoparticles under static loading, (2012)
Physical Review B – Condensed Matter and Materials Physics, 86 (10), art. no. 104111
 doi: http://dx.doi.org/10.1103/PhysRevB.86.104111

Wan, T., Liao, S., Wang, K., Yan, P., Clifford, M.  Multi-scale hybrid polyamide 6 composites reinforced with nano-scale clay and micro-scale short glass fibre,  (2013) Composites Part A: Applied Science and Manufacturing, 50, pp. 31-38
doi:10.1016/j.compositesa.2013.03.009

Wang J., Potter K., Etches J. A. Experimental investigation and characterisation techniques of compressive fatigue failure of composites with fibre waviness at ply drops, 2013,
Composite Structures 100, 398-403
doi:10.1016/j.compstruct.2013.01.010

Wang J., Potter K.D., Hazra K., Wisnom M.R. Experimental fabrication and characterization of out-of-plane fiber waviness in continuous fiber-reinforced composites, 2012,
Composite Materials 46 (17) 2041-2053
doi: 10.1177/0021998311429877

Wang J., Potter K.D., Wisnom M.R., Hazra K. Failure mechanisms under compression loading in composites with designed out-of-plane fibre waviness, 2013, Plastics, Rubber and Composites
42 (6) 231-238
doi.org/10.1179/1743289812Y.0000000019

Ward C., Hazra K., Potter K. Development of the manufacture of complex composite panels Development of the manufacture of complex composite panels, 2011, Int. J. Materials and Product Technology   42 (3/4), 131-155
International Journal of Materials and Product Technology

Wu Z., Weaver P.M., Raju G., Kim B.C. Buckling analysis and optimisation of variable angle tow composite plates 2012  Thin-Walled Structures 60, 163-172
doi:10.1016/j.tws.2012.07.008

Xiao X, A C Long, X Zeng, “Through-thickness permeability modelling of woven fabric under out-of-plane deformation, 2015 Journal of Materials Science. 49(21), 7563-7574
doi: 10.1007/s10853-014-8465-z

Xiao X, A Endruweit, X Zeng, J Hu, A C Long. “Through-thickness permeability study of orthogonal and angle-interlock woven fabrics”, Journal of Materials Science, v50, n3, 2015, pp 1257-1266.
doi: 10.1007/s10853-014-8683-4

Xiao X, A Endruweit, X Zeng, J Hu and A C Long “Transverse permeability study of orthogonal and angle-interlock woven fabrics” Journal of Materials Science 2015.50(03)1246-1266
doi: 10.1007/s10853-014-8683-4

Xiao X, J Hu, T Hua, X Zeng and A C Long “Through-thickness air permeability of woven fabric under low pressure compression” 2015 Textile Research Journal
doi:10.1177/0040517515569526

Xiao, X., Zeng, X., Long, A., Lin, H., Clifford, M., Saldaeva, E. An analytical model for through-thickness permeability of woven fabric,   (2012)
Textile Research Journal, 82 (5), pp. 492-501
doi: 10.1177/0040517511414979

Zeng X, C Sturrock and S Mooney, “Assessing the effect of fibre extraction processes on the strength of flax fibre reinforcement” 2015 Composites Part A. 70,1-7
doi:10.1016/j.compositesa.2014.12.004

Zeng X, Endruweit A, Brown L P, Long A C, “Numerical Prediction of In-plane Permeability for Multi-layer Woven Fabrics with Manufacture-induced Deformation”, Composites Part A: Applied Science and Manufacturing.
doi:http://dx.doi.org/10.1016/j.compositesa.2015.03.027

Zeng, X., Brown, L.P., Endruweit, A., Matveev, M., Long, A.C. Geometrical modelling of 3D woven reinforcements for polymer composites: Prediction of fabric permeability and composite mechanical properties
(2014) Composites Part A, v56, pp. 150-160
doi:10.1016/j.compositesa.2013.10.004

Zeng X, Brown LP, Endruweit A, Matveev M, Long AC. Advanced geometry modelling for 3D woven fabrics in composites processing and performance analysis.
JEC Composites Magazine. 2013;50(82):55-60

back to top of page

 

Conference Papers

Ayre D. “Innovative joining using embedded metallic inserts Joining Technologies for FRP Composite Materials”, Joining Technologies for FRP Composite Materials,
Nov 2012, Chesterfield, UK

Bassam El Said, Stephen R. Hallett, Modelling of fabric deformation in large scale 3d woven structures, 11th International Conference on Textile Composites (TEXCOMP11)  Leuven, 2013

Belnoue J P-H, S R Hallett, “Numerical and Experimental Investigation of Prepreg Compaction for Defect Formation Mechanisms”, 10th Canada-Japan Workshop on Composites, Vancouver, 2014

Belnoue JP-H, O Nixon-Pearson, D Ivanov, S R Hallett,  “A Novel Consolidation Model for Toughened Prepreg Systems under Processing Conditions”, International Conference on Manufacturing Advanced Composites (ICMAC 2015), Bristol, 2015

Bloom L. D., Elkington M., Ward C., Potter K. (2013) On prepreg properties and manufacturability. In: 24th Annual SICOMP Conf, 30-31 May, Linköping, SE. Piteå, SE: Swerea SICOMP AB, ORAL PRESENTATION ONLY

Bloom D., Ward C., Potter K. A study of the pressure distribution in the hand layup an vacuum bagging processes  2014 ECCM 16, 22-26 June, Seville, SP. No page numbersT

Bloom L  D, M Elkington, C Ward, K Potter.  “On Prepreg Properties and Manufacturability”, 24th SICOMP Conf Manufacturing and Design Composites,
May 2013, Linköping, Sweden.

Bloom L.D., Elkington M., Ward C., Potter K, On prepreg properties and manufacturability,
2013, 24th Annual SICOMP Conf, 30-31 May, Linköping, SE. Piteå, SE: Swerea SICOMP AB,
Oral Presentation only:

Bloom L.D., Elkington M., Ward C., Potter K. On prepreg Properties and Manufacturability,
2013, ICCM 19, 28 July – 2 Aug., Montreal, CA. Montreal:
Canadian Association for Composite Structures and Materials, 4397-4409

Bloom, L.D., Elkington, M., Ward, C., Chatzimichali, A.P., Potter, K., On Prepreg properties and manufacturability, Proceedings of the 19th International Conference on Composite Materials, pp. 4397 – 4404, 28 July – 2 Aug 2013, Montreal, Canada

Brown L P, S Yan, X Zeng, A C Long. “Mesoscale geometric modeling of bifurcation in 3D woven T-beam preforms”, Proc. 12th Int. Conf. on Textile Composites (TexComp-12), Raleigh, North Carolina, May 2015

Brown, L P, B Wendland, A C Long, Gries, T, “3D-Woven Profile Design Tool for Users with a Non-Textiles Background”, in ICMAC June 2015: Bristol, UK

Brown L P, X Zeng, A C Long, I A Jones. “Recent developments in the realistic modeling of textile structures using TexGen”,  1st Int Conf on Digital Technologies for the Textile Industries, Manchester, Sept 2013.

Brown L P, X Zeng, A C Long, R Brooks, I A Jones. “Predicting the coefficient of expansion for textile composites based on a unit cell approach”, 11th Intl Conf on Textile Composites,
Leuven, Sept 2013.

Chakladhar N D, P Mandal, P Potluri, multi-scale modelling of fibre bundles, Proceedings of International Conference on Composite Materials (ICCM19),
Montreal, July 28-August 2, 2013

Chatzimichali A P, M Yearworth, K D Potter, (2014) “Locked in a capability trap? The case of the composites industry”. In: Intl Conf System Dynamics Society, Delft, NL, 20-24 July 2014

Chatzimichali A.P., Yearworth, M., Potter K.D., Locked in a capability trap? The case of the composites industry, The 2014 International Conference of the System Dynamics Society, July 20 – 24, 2014, Delft, The Netherlands (Accepted

Chatzimichali, A.P., Potter, K.D. Growth through material: An exploratory study in the development of the composite industry 2014  The 2nd Business Systems Laboratory International Symposium, Jan. 23- 24, Rome, Italy

Chatzimichali, A.P., Smulders, F.E., Potter, K.D. Understanding the NPD – Production Interface: Advanced industrialisation and growth in the composite industry 2013 Proc 14th Intl Continuous Innovation Network Conf, 8-11 Sept., Nijmegen, Netherlands, 198 – 209

Coballero A S, P Potluri, D Jetavat, W R Kennon. “Robotic dry fibre placement of 3D preforms”, 19th Intl Conf on Composite Materials, Jul-Aug 2013, Montreal CA.

Crowley D, D Bloom, M Elkington, H Jones, M Such, C Ward, K D Potter, (2014) “Optimizing manual processes with a view to automation of composites manufacture”. In: 3rd Annual EPSRC Manufacturing the Future Conference 23-24 Sept, Glasgow Science Centre, ORAL PRESENTATION ONLY

Crowley D, C Ward, K D Potter, (2015) Acceptance criteria – a source of variability. In: ICMAC 24-25 June, Bristol UK, ORAL PRESENTATION ONLY

Crowley D, Jones H V, M Elkington, D Bloom, M C Such, K D Potter, C Ward ,(2015) “Capturing knowledge and applying human factors in advanced composite materials manufacturing – a process of change”. In: Ergonomics & Human Factors 13-16 Apr., Daventry, UK. ORAL PRESENTATION ONLY

Crowley D., Bloom D., Elkington M., Jones H., Such M., Ward C., Potter K. (2014) Hand lay-up – how to do it better. In: Composites UK Annual Conference: Developing and Supporting a UK Supply Chain 13-14 May Bristol UK. Composites UK: Hemel Hempstead, Herts, UK. No page numbers/ORAL PRESENTATION ONLY

Crowley D., Bloom D., Elkington M., Jones H., Such M., Ward C., Potter K. (2014) Optimizing manual processes with a view to automation of composites manufacture. In: 3rd Annual EPSRC Manufacturing the Future Conference 23-24 Sept, Glasgow Science Centre (Accepted)

Crowley D., Ward C., Potter K., Kasyutich O., Jonas K., Jennings N. (2013) A review of acceptance criteria and process requirements. In: NetComposites Workshop: Quality in Manufacturing Fibre Reinforced Polymer Materials, 30 Apr, Chesterfield, UK. Chesterfield: Net Composites Ltd, ORAL PRESENTATION ONLY

Crowley D., Ward C., Potter K., Kasyutich O., Jonas K., Jennings N. (2013) A study into composite laminators’ motivation. In: FAIM 2013, 26-28 June, Porto, PT. Universidad do Porto: Porto, 971-984

Crowley D., Ward C., Potter K.  A status of acceptance criteria and process requirements in advanced composites manufacturing, and whether they are fit for purpose 2013  SAE Aerotech 24-26 Sept., Montreal, CA. Warrendale, PA: SAE Intl, Paper: 13ATC-0157

Crowley D., Ward C., Potter K. The manufacture of advanced composite parts to rigid industrial specifications – can it be made? 2013 SAE Aerotech 24-26 Sept., Montreal, CA. Warrendale, PA: SAE Intl, Paper: 13ATC-0158

Crowley D., Ward C., Potter K., Kasyutich O., Jonas K., Jennings N, A study into composite laminators’ motivation, 2013, FAIM 2013, 26-28 June, Porto, PT. Porto: Universidad do Porto, 971-984

Dang T., Hallett S.R., Le Cahain Y., Kim B.C., Liu W, Modelling of as-manufactured geometry for impact behaviour prediction of variable angle tow laminates, 2013, ICCS17, 17-21 Jun, Porto PT. Porto, PT: University of Porto

Di Giandomenico V , Pasco C – two conferences papers presented at Composites Joining 8 May 14

Elkington M, C Ward, K D Potter (2015) “Automated layup of sheet prepreg on complex parts”. In: ICMAC 24-25 June, Bristol UK, ORAL PRESENTATION ONLY

Elkington M., Bloom D., Ward C., Chatzimichali A., Potter K. Understanding the lamination Process, 2013, ICCM 19, 28 July – 2 Aug., Montreal, CA. Montreal: Canadian Association for Composite Structures and Materials, 4385-4396

Elkington M., Ward C., Chatzilichali A., Potter K. Preshearing: the evolution of manual layup Preshearing: the evolution of manual layup 2014 ECCM 16, 22-26 June, Seville, SP. Seville: European Society of Composite Materials (ESCM), IN PRINT

El Said B, D Ivanov, A C Long, S Hallett. “Integrated multi-scale modeling of 3D woven structures”, Proc. 20th Int. Conf. on Composite Materials (ICCM-20), Copenhagen, Denmark, Jul 2015

El Said B, Green S and Hallett SR, A Multi-Scale Approach to Modelling of 3D Woven Fabric Deformation, Deformation and Fracture of Composites, Cambridge, 2013

Endruweit A, X Zeng, A C Long. “Multi-scale modeling of combined deterministic and stochastic fabric non-uniformity for realistic resin injection simulation”, Proc. 12th International Conference on Flow Processes in Composite Materials (FPCM-12), Twente, Netherlands, July 2014

Endruweit A, F Gommer, J Hutchinson, S Koutsonas, A C Long, P Schubel, X Xiao, X Zeng. “Resin flow simulation based on advanced reinforcement geometry modeling from yarn-scale to component-scale”, 11th Intl Conf on Flow Processes in Composite Materials, Auckland, New Zealand, July 2012.

Endruweit A, F Gommer, A C Long. “Multi-scale analysis of defect formation in liquid composite moulding”, Composites Engineering Conf, Birmingham, Nov 2012.

Endruweit A, X Zeng, A C Long. “Effect of specimen history on measured in-plane permeability of fabrics”, 19th Intl Conf on Composite Materials,
Jul-Aug 2013, Montreal CA

Evans A D, C C Qian, L T Harper, N A Warrior, P Brookbank, “Flow Characteristics Of Carbon Fibre Sheet Moulding Compounds” Savage 20th International Conference On Composite Materials, Copenhagen, 19-24th July 2015

Evans A D, C C Qian, L T Harper, N A Warrior “Flow Behaviour Of Directed Carbon Fibre Moulding Compounds”,  ICMAC 2015 Abstract

Gommer F, A Endruweit, A C Long. “Generation, modeling and validation of statistically equivalent micro-structures”,  19th Intl Conf on Composite Materials,
Jul-Aug 2013, Montreal CA.

Green S D, A C Long, S R Hallett. “Numerical modeling of 3D preform deformations”,
8th European Solid Mechanics Conf, Graz,
Austria, July 2012

Green S D, S R Hallett, A C Long. “Simulated textile geometry with realistic deformations for finite element modelling”, 11th Intl Conf on Textile Composites,
Leuven, Sept 2013.

Green S.D., Matveev M., Long A.C., Hallett S.R. Modelling of 3D woven composites with realistic unit cell geometry 2013 ICCM 19, 28 July – 2 Aug., Montreal, CA. Montreal: Canadian Association for Composite Structures and Materials, 6139-6147

Hall C., Ward C., Ivanov D. S., Potter K, The compaction of uncured toughened prepreg laminates in relation to automated forming, 2012, ECCM 15, 24-28 June, Venice, It. Venice: European Society of Composite Materials (ESCM), Paper number: 2443-ECCM15

Hartley J, C Ward, J Kratz, (2015) “Crash simulation of tufted sandwich components for manufacturing applications”. In: ICMAC 24-25 June, Bristol UK, ORAL PRESENTATION ONLY

Hazra K., Blake S., Potter K., Wisnom M. R. In-process fiber orientation measurement and foreign object damage (FOD) prevention for complex preform or prepreg lay-ups 2012
Composites: Part B 43, 997-1009
ISSN00911062

Helenon F., Lukaszewicz D., Ivanov D., Potter K. Modelling slit tape deposition during automated fibre placement, 2013, ICCM 19, 28 July – 2 Aug., Montreal, CA. Montreal: Canadian Association for Composite Structures and Materials, 4735-4746

Helmus R, J Kratz, C Ward, R Hinterhölzl, P Hubert (2015) “Inter-ply void formation in out-of-autoclave prepreg manufacturing” In: ICMAC 24-25 June, Bristol UK, ORAL PRESENTATION ONLY

Ivanov D S, J A P White, Y Mahadik, C Ward, (2015) “Automated integration of resin in the context of liquid moulding” In: 2nd Intl Symp Automated Composites Manufacturing 23-24 Apr., Montreal CA, ORAL PRESENTATION ONLY

Ivanov D. S. Consolidation of textile preforms: Features that matter 2013 Texcomp 11, 16-20 Sept., Leuven, BE. Leuven: Leuven University, NO ID NUMBER

Ivanov D., Li Y., Ward C., Potter K. Transitional behaviour of prepregs in automated fibre deposition processes, 2013, ICCM 19, 28 July – 2 Aug., Montreal, CA. Montreal: Canadian Association for Composite Structures and Materials, 1381-1391 Paper ID IVA81361

Jetavat D, S Sharma, P Potluri, 3D weaving of near-net preforms, Proceedings of ECCM15 conference, Venice, June 24-28, 2012

Jetavat D, S Sharma “Characterisation of Yarn Path Variations in Complex Textile Preforming Processes – an Experimental and Analytical Investigation”, Fifth 3D fabric conference Dec 2013, Delhi

Jones H V, A P Chatzimichali, K D Potter, C Ward (2015) “Exploiting knowledge bases for batch of one manufacture”. In: ICMAC 24-25 June, Bristol UK, ORAL PRESENTATION ONLY

Jones H V, A P Chatzimichali, C Ward, K D Potter (2015) “Exploring designing with composites materials”. In: 8th Design Theory SIG Workshop, 26-27 Jan. Paris, Fr. Bristol: UK, ORAL PRESENTATION ONLY

Kennon W R, P Potluri, D Goktas, Orthogonal stitching of 2D fabrics for improved delamination resistance, Proceedings of International Conference on Composite Materials (ICCM19), Montreal, July 28-August 2, 2013

Kim B.C., Hazra K., Weaver P.M., Potter, K, Limitations of fibre placement techniques for variable angle tow composites and their process-induced defects, 2011, ICCM18, 21-26 Aug, Jeju Island, Korea, Jeju Intl Conv Centre: The Korean Society of Composite Materials, Paper ID: T11-3-IF1097

Kim B.C., Potter K.D., Weaver P.M, A novel approach for manufacturing variable angle tow composites – Continuous tow shearing, 2013, ICCS17, 17-21 Jun, Porto PT. Porto, PT:  University of Porto

Kim B.C., Potter K.D., Weaver P.M, Multi-tow shearing mechanism for high speed manufacturing of variable angle tow composites, 2012, ECCM 15, 24-28 June, Venice, It. Venice: European Society of Composite Materials (ESCM), Paper number: 1900-ECCM15

Koncherry V, P Potluri, multi-functional carbon fiber plat tape for composites, Proceedings of International Conference on Composite Materials (ICCM19),
Montreal, July 28-August 2, 2013

Kularatna S (2015) “Developing skills and training aids by the use of gamification and virtual reality of the composite layup process”. In: ICMAC 24-25 June, Bristol UK, ORAL PRESENTATION ONLY

Li X., Hallett S.R., Wisnom M.R.  Modelling the effect of gaps and overlaps in automated fibre placement (AFP) manufactured laminates 2013 ICCM 19, 28 July – 2 Aug., Montreal, CA. Montreal: Canadian Association for Composite Structures and Materials, 151-159

Lightfoot J.S., Potter K., Wisnom M.R. Examination of drape-induced defects using computer X-ray tomography 2013 ICCM 19, 28 July – 2 Aug., Montreal, CA. Montreal: Canadian Association for Composite Structures and Materials, 7108-7116

Lombetti D M, G Dell’anno, I K Partridge, A Skordos. “Delamination performance of tufted carbon/epoxy composites made by automated dry fibre placement”, 19th Intl Conf on Composite Materials, Jul-Aug 2013, Montreal CA.

Long A C, A Endruweit, X Zeng. “Prediction of dry spot formation in non-uniform reinforcements with stochastic properties”, Proc. 12th Int. Conf. on Textile Composites (TexComp-12), Raleigh, North Carolina, May 2015

Long A C, L Brown, A Endruweit, F Gommer, I A Jones, M Matveev, X Zeng. “Influence of reinforcement variability on the design and manufacture of textile composites”, 11th Intl Conf on Textile Composites), Leuven, Sept 2013 (Invited Paper)

Lukaszewicz D.H-J.A., Potter K, Modelling of automated layup processes for improved efficiency    and sustainability, 2011, Erath M. ed. SAMPE SETEC 11, 14-16 Sept, Laiden,Netherlands, Covina,  CA: SAMPE

Mahadik Y, C Scrimshaw, C Ward, D Ivanov. “Compressibility Of Complex 3d Braided Architectures”, 11th Intl Conf on Textile Composites, Sept 2013, Leuven, Belgium.

Mesogitis,T S, Skordos A A, Long A C, “Non-crimp fabrics geometrical variability and its influence on composites cure”, Proc 16th European Conference on Composite Materials (ECCM-16), Seville, Jun 2014.

Mesogitis T S, A A Skordos, A C Long. “Stochastic simulation of composite cure”,  19th Intl Conf on Composite Materials,  Jul-Aug 2013, Montreal CA.

Mills A – keynote paper at Composites Innovation June 2014 – Manchester – Structural Joints Using Novel Embedded Inserts

Mohamed G.F.a., Helenon F., Hallett S.R., Yasaee M., Allegri G. Predicting the through-thickness enhancement of z-pinned composite laminates  2013 ICCM 19, 28 July – 2 Aug., Montreal, CA. Montreal: Canadian Association for Composite Structures and Materials, 2899-2908

Nawaz S, P Potluri, Study of braid topology and effect of braid pattern on composite properties, Proceedings of International Conference on Composite Materials (ICCM19), Montreal, July 28-August 2, 2013

Nixon-Pearson O, JP-H Belnoue, D Ivanov,S R Hallett,  “The compaction behaviour of un-cured prepregs”, 20th International Conference on Composite Materials (ICCM 20), Copenhagen, 2015

Pollard D P, Roberts J A, Ward C, Etches J, Potter K (2015) “Exploring the Feasibility of Utilising Additive Manufacturing and Transfer Pad Printing as a Flexible and Robust Method to Automate Composite Sandwich Panel Production”. In: ICMAC 24-25 June, Bristol UK, ORAL PRESENTATION ONLY

Pollard D P, J A Roberts, C Ward, J Etches, K Potter (2014) “Automating aerospace composite sandwich panel production by utilising additive manufacturing and pick and place pad printing”. In: 3rd Annual EPSRC Manufacturing the Future Conference 23-24 Sept, Glasgow Science Centre, ORAL PRESENTATION ONLY

Pollard D.P., Roberts J.A., Ward C., Etches J., Potter K. (2014) Automating aerospace composite sandwich panel production by utilising additive manufacturing and pick and place pad printing. In: 3rd Annual EPSRC Manufacturing the Future Conference 23-24 Sept, Glasgow Science Centre (Accepted)

Potluri P, “3D near-net preforming, from conventional weaving to robotic fibre placement”, International Conference on Composite Materials and Technology, 7-8 February 2014, Space Society of Mechanical Engineers & ATIRA, Ahmedabad, India (Plenary)

Potluri P, A Silva Caballero, “3D preforming with robotics”, 3D Fabrics Conference, Raleigh,NC, May 2015.

Potluri P, “Mechanics of 3D Textile Composites for Improved Damage Tolerance of Aerospace Structures”, International Conference on Computational &Experimental Engineering and Science (ICCES 2014) in Changwon, Korea, June 2014  (Keynote)

Potluri P, Mechanics of 3D Textile Composites for Improved Damage Tolerance of Aerospace Structures, International Conference on Computational & Experimental Engineering and Science (ICCES 2014)  in Changwon, Korea, June 2014  (Keynote)

Potluri P, 3D near-net preforming, from conventional weaving to robotic fibre placement, International Conference on Composite Materials and Technology, 7-8 February 2014, Space Society of Mechanical Engineers & ATIRA, Ahmedabad, India (Plenary)

Potluri P, Journey through robotics and textiles into composites, 5th World Congress on 3D fabrics and applications, 16-17 December 2013, New Delhi, India (Plenary)

Potluri P, R Kennon, D Jetavat, A S Coballero, S Sharma. “Complex preforming with 3D weaving and dry fibre placement”, 11th Intl Conf on Textile Composites, Leuven, Sept 2013.

Potluri P, Z Yousaf, F Leonard, P Withers, Meso-scale analysis of 2D glass woven preforms under compaction, Proceedings of International Conference on Composite Materials (ICCM19), Montreal, July 28-August 2, 2013

Potter K., Bloom D., Chatzimichali A., Elkington M., Ward C. (2013) Design for manufacture in composites. In: ICACME2013, 10-12 Sept, Beijing, China. Beijing, China: Chinese Society fir Composite Materials. No page numbers.

Potter K., Ward C., Bloom D., Elkington M., Jones H., Such M., White J., Middleton R, (2013) Tactile and discrete manufacturing aids for composites layup – progress towards better understanding of the layup process. In: NetComposites’ ‘Technology Session’ at the Composites Engineering Show, 12-13 Nov., NEC Birmingham, UK. Chesterfield: Net Composites Ltd, ORAL PRESENTATION ONLY

Potter K., Bloom D., Chatzimichali A., Elkington M., Hancock S., Kim B.C., Lightfoot J., Moss A., Ward C., Yu H. (2013) Towards a Design for Manufacture capability in composites – tying together manufacturing research to maximise impact. In: SAMPE UK + EIRE One day Master Class, 2 Oct, National Composites Centre, Bristol, UK. Bristol UK: NCC. ORAL PRESENTATION ONLY

Rhead A.T., Butler R., Liu W., Hallett S.R., Kim B.C. Compression after impact strength of a buckling resistant tow steered panel, 2013, ICCM 19, 28 July – 2 Aug., Montreal, CA. Montreal: Canadian Association for Composite Structures and Materials, 4960-4969

Roy S S, P Potluri, C Soutis, A study of quadraxial and triaxial braided tubes developed by braid winding, Proceedings of International Conference on Composite Materials (ICCM19), Montreal, July 28-August 2, 2013

S.D. Green, S.R. Hallett, A.C. Long, Simulated textile geometry with realistic deformations for finite element modelling, 11th International Conference on Textile Composites (TEXCOMP11), Leuven, 2013

Selver E,  Potluri P, Soutis C, Damage Tolerance and Healing Performance of Hybrid Textile Composites”, AUTEX 2014, 14th World Textile Conference, May 26th  – 28th, 2014, Bursa , Turkey

Selver E, P Potluri, P Hogg, C Soutis. “Damage Tolerance and Self-healing Behaviour of Composites incorporating Hybrid Yarns”,
ICCS 17, Porto, June 2013.

Shakspeare P, C Ward, K D Potter (2015) “Establishing a national framework to develop and assure a competent workforce for composites manufacture”. ICMAC 24-25 June, Bristol UK, ORAL PRESENTATION ONLY

Sharma S , Jetavat D, Potluri P Characterisation of yarn path variations in complex textile preforming processes- an experimental and analytical investigation, 3D fabrics and applications, 16-17 December 2013, New Delhi, India

Silva-Caballero A, P Potluri, D Jetavat, W R Kennon, Robotic dry fiber placement of 3D prefroms, Proceedings of International Conference on Composite Materials (ICCM19), Montreal, July 28-August 2, 2013

Skordos A, T Messogitis, A C Long. “Stochastic simulation of the cure of advanced composites”, Proc. 20th Int. Conf. on Composite Materials (ICCM-20), Copenhagen, Denmark, Jul 2015

Smith RA, Goldo G, Mukhopadhyay S, Lawrie A and Hallett SR, 3D Characterisation of Fibre Orientation and Resulting Material Properties, Advanced Non-destructive Evaluation Techniques for Polymer Based Composites in Military Vehicles (AVT-224), Latvia

Smith RA, Goldo G, Mukhopadhyay S, Lawrie A and Hallett SR, 3D characterisation of fibre orientation and resulting material properties,
NDT 2013, Telford, UK

Snudden J P, C Ward, K Potter, (2015) “Reforming waste ncf carbon fibre generated during preform cutting – a feasibility study”. In: ICMAC 24-25 June, Bristol UK, ORAL PRESENTATION ONLY

Snudden J P, Such M S, Ward C, Potter K (2015) “Exploring the formability of waste NCF carbon fibre reformed as a discontinuous sheet material using a novel test regime”. In: TEXCOMP-12 Conf 26-29 May, Raleigh, NC, USA

Snudden J., Ward C., Potter K. (2014) Reformed carbon fibre materials for energy absorbing joints. In: Joining technologies for fibre-reinforced polymer composite materials, 8 May, WMG, Warwick, UK. Net Composites: Chesterfield. No page numbers

Such M C, C Ward, K D Potter (2015) “Investigation of property retention and formability of aligned discontinuous fibre composites”. In: ICMAC 24-25 June, Bristol UK, ORAL PRESENTATION ONLY

Such M.C., Ward C., Hutabarat W., Tiwari A. (2014) Intelligent composite lay-up by the application of discrete technologies. In: 8th Intl Conf Digital Enterprise Technology, 25-28 March, Stuttgart, DE. Stuttgart, DE: Fraunhofer IOSB, Paper # 60

Such M.C. (2014) Intelligent composite layup through the application of tracking and projection technologies. In ’SAMPE UK + EIRE annual conference, 9 April, Cranfield University. Cranfield: Cranfield University, IN PRINT

Such M., Ward C., Hutabarat W., Tiwari A. Intelligent composite layup by the application of low cost tracking and projection technologies 2014 DET 2014 The 8th Intl Conf Digital Enterprise Technology, 25-28 Mar, Stuttgart, DE. Stuttgart, DE: Fraunhofer IAO, IN PRINT

Such M., Ward C., Hutabarat W., Tiwari A. Intelligent composite layup by the application of low cost tracking and projection technologies 2014 Erath M. ed. SAMPE Europe SEICO 14, 11-12 March, Paris, Fr. Covina, CA: SAMPE, IN PRINT/ORAL PRESENTATION ONLY

Thompson A, B El Said, JP-H Belnoue, S R Hallett, “High fidelity numerical simulations of textile preform deformation”, International Conference on Manufacturing Advanced Composites (ICMAC 2015), Bristol, 2015

Thompson A, B El Said, M Such, JP-H Belnoue, S R Hallett, “Discrete modelling of non-crimp fabric multi-layer preforming processes”, 12th International Conference on Textile Composites (Texcomp-12), Raleigh, 2015

Thompson A, B El Said, JP-H Belnoue, S R Hallet ”High Fidelity Numerical Simulations of Textile Preform Deformation”, 10th Canada-Japan Workshop on Composites, Vancouver, 2014

Turner, P, T Liu, X Zeng 2014 “Bending characteristics of 3D woven carbon composites” In: 16th European Conference on Composite Materials

Ward C., Kim B.C., Snudden J. P., Potter K. D. (2013) An update on the activities in Bristol regarding design for recycling and reuse/recycling. In: Design for the End of Life of Fibre Reinforced Composite Materials, 25 Sept., Chesterfield, UK. Chesterfield: Net Composites Ltd, ORAL PRESENTATION ONLY

Ward C, A Creak, C Heath, J A P White, Y Mahadik, D S Ivanov. “Novel Flexible Tooling to Enhance Liquid Resin Infusion Manufacture for Net-Shaped Preforms”, 11th Intl Conf on Textile Composites, Sept 2013, Leuven, Belgium.

Ward C., Bhatnagar V., Potter K. Developing an automated system for the removal of protective films from pre-preg material, to remove a manufacturing bottleneck in terms of pick and place automation 2013 Erath M. ed. SAMPE SETEC 13, 11-12 Sept., Wuppertal, DE. Covina, CA: SAMPE, 125-131

Ward C., Creak A., Heath C., White J. A. P., Mahadik Y., Ivanov D. S.  Novel flexible tooling to enhance liquid resin infusion manufacture for net-shaped preforms 2013 Texcomp 11, 16-20 Sept., Leuven, BE. Leuven: Leuven University, NO ID NUMBER

Ward C., Hancock S., Potter K, Composite material forming using drape simulation software: informing manual and automation needs, 2012, MUG 2012, 1 – 4 Oct., New York, NY, USA. New Jersey: Magestic Systems Inc., ORAL PRESENTATION ONLY

Ward C., Lukaszewicz D. H-J. A., Potter K.D, Exploring manual forming of complex geometry composite panels for productivity and quality gains in relation to automated forming capabilities, 2011, SAE 2011 Aerotech Congress and Exhib 17-21 Oct, Toulouse, Fr. Warrendale, PA: SAE Intl, Paper number: 2011-01-2547

White J.A.P., Etches J.A., Ward C. The use of low cost additive layer manufacturing for the repair of composite sandwich panels 2013  Non Destructive Testing and Repair of Fibre Reinforced Composites, 26-27 Nov., Rotherham, UK. Chesterfield: Net Composites

Winter D J J, C Ward, P Gibbons, C McMahon, K D Potter, (2015) “Capturing the impacts of continuous improvement in low volume-high value aerospace composites manufacturing”. In: ICMAC 24-25 June, Bristol UK, ORAL PRESENTATION ONLY

Winter D J J, P Ashton-Rickardt, C Ward, P Gibbons, B Bauw, C A McMahon, K D Potter, (2015) “Introducing a Rate Wall Approach for Improving Throughput of Low Volume – High Value Manufactured Products”. In: FAIM 2015 23-26 June, Wolverhampton, UK

Winter D., Jones C., McMahon C., Ward C., Potter K., Gibbons P, The application of lean philosophy during manufacture of advanced airframe structures in a new product introduction (NPI) environment, 2013, FAIM 2013, 26-28 June, Porto, PT. Porto: Universidad do Porto, 1503-1513

Winter D.J., Ashton-Rickardt P., Ward C., Yearworth M., McMahon C., Potter K. Systems thinking for rapid decision making in industrial contexts 2014  8th Ann Intl IEEE Systems Conf, 31 Mar – 3 Apr, Ottowa, CA. NJ, USA: IEEE, IN PRINT

Yan S, A C Long, X Zeng. “Experimental assessment and numerical analysis of 3D woven composite T-joints under tensile loading”, Proc. 20th Int. Conf. on Composite Materials (ICCM-20), Copenhagen, Denmark, Jul 2015

Yu H., Potter K.D., Wisnom M.R, A novel manufacturing method for aligned short fibre composite, 2012, ECCM 15, 24-28 June, Venice, It. Venice: European Society of Composite Materials (ESCM), Paper number: 1862-ECCM15

Yu H., Potter K.D., Wisnom M.R. Aligned short fibre composites with high performance, 2013, ICCM 19, 28 July – 2 Aug., Montreal, CA. Montreal: Canadian Association for Composite Structures and Materials, 2583-2590

Zeng X, A C Long, I Ashcroft, P Potluri. “Fibre architecture design of 3D woven composite reinforcement with genetic algorithms – a unit cell based optimization framework and performance assessment”, Proc. 20th Int. Conf. on Composite Materials (ICCM-20), Copenhagen, Denmark, Jul 2015

Zeng X, A Endruweit, A C Long. “Numerical prediction of in-plane permeability for multi-layer woven fabrics with manufacture induced deformation”, Proc. 12th International Conference on Flow Processes in Composite Materials (FPCM-12), Twente, Netherlands, July 2014

Zeng X, A C Long, A Endruweit. “Numerical prediction of permeability of textiles for the international benchmark exercise”, 11th Intl Conf on Flow Processes in Composite Materials, Auckland, New Zealand, July 2012.

Zeng X, L P Brown, A Endruweit, A C Long. “Advanced geometry modeling for 3D woven fabrics in composites processing and performance analysis”, 3rd World Conf. on 3D Fabrics & their Applications, Aachen, Germany, Sept 2012.

 back to top of page

 

Book Section

Potluri P. Braiding. In: Luigi Nicolais, ed. International Encyclopedia of Composites,

New York, John Wiley.2012 (prestigious collection on composites –invited and peer

reviewed contribution)

Potluri P and S Nawaz, Developments in Braided Fabrics, Specialist yarn, woven and fabric structures: Developments and applications, ed. H Gong,

Woodhead Publishing, 2011

Potter K, Ward C, Draping processes for composites manufacture, 2014, Boisse, P. ed. Advances in composites manufacturing and process design. Cambridge:

Woodhead Publishing

Abdiwi F, P Harrison, Z Guo, P Potluri, WR Yu,  Measuring the Shear-Tension Coupling of Engineering Fabrics, American Institute of Physics Proceedings, (2011),

1353, 889-894 (AIP)

 back to top of page